A custom wedding sets page can look complete and still leave the buyer without the one number that matters.

Most custom briefs die in the first render
A brief that says the design should feel delicate gives the CAD team nothing to measure. The range holds 1 designs in this category.
A brief that survives has numbers, priorities, and one named reference per dimension.
A range of 1 designs is deep enough that a shortlist of six can be drawn without leaving a price slot empty.
With 1 designs on file, the reorder path usually exists before the first order is placed.
What the brief has to pin down
| Item | What to specify | Why it matters |
|---|---|---|
| Base metal | the base metal listed on each spec sheet or an alternative | Sets the budget and the finish path |
| Stone | the stated stone, size and count | Drives the setting and the price |
| Proportions | Shank width, setting height in mm | The two numbers that decide comfort |
| Size range | Smallest and largest to be quoted | Avoids a re-quote after approval |
Priorities, not adjectives
Rank three things and say which one gives way if the render cannot hold all of them: stone security, setting height, or shank weight. A brief without a priority list gets a render that satisfies none of them.
Reference designs in the range include 14K/18K Gold IGI Lab Diamond Wedding Band Ring.
The approval loop
- Approve the wireframe before the render
- Check stone seating in the render, not the hero angle
- Confirm dimensions in millimetres on the drawing
- Sign off the metal and finish on a physical sample
Each step is cheaper than the one after it, which is why the order matters.
What to keep from the process
Keep the approved drawing, the spec sheet and the sample photos together. That file is what makes a reorder a reorder instead of a new project.
Range snapshot: Custom Wedding Sets by the numbers
| Dimension | Reading | Buying note |
|---|---|---|
| Designs on file | 1 | Shortlist can come from stock patterns |
Read the snapshot before the shortlist: a category that is narrow in metal but deep in cut behaves differently from one that is the other way round.
Frequently Asked Questions
How long does a custom brief take to prepare?
An hour with the fields above is enough. Most delays come from missing dimensions, not from design debate.
Should the brief include a reference image?
One reference per dimension, clearly labelled as a reference rather than a copy target.
Can the factory change the design during CAD?
They can propose changes, but the priority list decides which proposals are acceptable.
What is the most expensive omission?
Setting height. It is the number that most often forces a rebuild after approval.
Does custom work need a separate MOQ?
Yes. Custom runs are quoted per order and usually carry a higher minimum than stock patterns.
If you want to work from the current range rather than from a catalogue PDF, send the two price slots you sell and the size bands you stock. We will reply with the designs that fit, the build on each, and the reorder path. HOLYCOME keeps the full range in one place.
The checklist below is the short version of everything above, and it is worth running before the quote rather than after the order.
- Confirm the design is a stock pattern and not a new build
- Match the base metal and finish against the spec sheet
- Check the stone origin wording before it goes on a listing
- Quote every design at the same MOQ tier before comparing
- Ask which design in the same price slot absorbs a stock-out




