AQL, Tray Checks and What a QC Report Should Say in the Private Label Carton Program
A US buyer of custom Wedding Sets sent us a competitor's custom Wedding Set in July with one question: why does this fail at metal lot mismatch after a season. We measured it, rebuilt the spec around cross-piece color match and stone count per piece, and shipped 200 custom Wedding Sets that cleared inspection with zero rejects, which the Private Label Carton file records at USD 78-504 in private-label carton with hangtag.
That rejection was avoidable at the drawing stage. Metal lot mismatch belongs on the spec sheet next to the stone size, not in the claim email three weeks after arrival, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 78-504.
We kept the Private Label Carton price and changed the four measurements that matter. The rebuild cost about 28 seconds per piece and removed the whole claim conversation, which is how the Private Label Carton account reads it at USD 78-504.
Four Spec Lines a Private Label Carton Buyer Checks
The Private Label Carton buyer signs on four numbers. The table puts the trade default beside our standard so the difference is visible before the deposit, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 78-504.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Stone colour consistency | Graded by eye under D65 | Colour matched to a retained master stone, per tray | Repeat colour complaint in the same SKU |
| Sizing drift across the run | Not measured | Go/no-go gauge on every size, drift held under 0.15 mm | Resize queue and reship cost |
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
None of the four adds cost at USD 78-504. They add about 28 seconds per piece and remove the reason to inspect twice.
Private Label Packaging for custom Wedding Sets
Private label changes four things and none of them is the piece: the stamp, the hangtag, the box and the barcode. Get those four aligned before the first bulk run or the carton arrives with your name spelled two ways, shipped as private-label carton with hangtag and certified GRA report.
The stamp goes inside the shank or on the clasp tag, and it has to be small enough not to break the surface on a thin custom Wedding Set. Below 0.8 mm of shank width we recommend the hangtag only, which the Private Label Carton file records at USD 78-504 in private-label carton with hangtag.
Cartons are quoted at 200 pieces with the label printed, not stickered, because a sticker on a matte box reads as a repack. Lead time adds three days for the print run, which is why private label starts later than stock, on a 200-piece Private Label Carton order at USD 78-504.
Cost Split on a Private Label Carton Piece at USD 78-504
At USD 78-504 per piece for custom Wedding Sets, the stone sits near a quarter and the labor line moves by double digits between two quotes for one drawing.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for custom Wedding Sets | 32% | Alloy choice and casting yield |
| Stone or melee for custom Wedding Sets | 23% | Sieve range and lot batching |
| Setting and finishing labor for custom Wedding Sets | 21% | Jig design and bench minutes |
| Plating, polish and QC for custom Wedding Sets | 14% | Per-tray versus per-piece checks |
| Packaging for custom Wedding Sets | 10% | private-label carton with hangtag |
The saving in the cheapest quote hides in plating and stone grade. At 200 pieces that saving is visible in season two, which the Private Label Carton file records at USD 78-504 in private-label carton with hangtag.
Three Failures That Reach the Private Label Carton Bench
box fit
A set that does not sit flat in its box photographs badly and arrives with a shifted piece. Box tolerance is part of the product, on a 200-piece Private Label Carton order at USD 78-504.
The commercial effect is piece replacement and a box reship, typically USD 18-30 per set. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, with GRA report and private-label carton with hangtag stated on the same sheet.
metal lot mismatch
A set assembled from two casting lots shows a tonal step between the ring and the pendant under daylight. One lot per set is the rule, shipped as private-label carton with hangtag and certified GRA report.
Our countermeasure is a gauge and a written limit. It adds about 28 seconds per piece and removes the defect from the run rather than from the carton, quoted at USD 78-504 per piece in private-label carton with hangtag.
stone count variance
A halo set quoting 42 stones that ships with 38 reads as a downgrade. Count per piece, not per order, which the Private Label Carton file records at USD 78-504 in private-label carton with hangtag.
In a 200-piece run this typically shows on 14 of pieces. Catching it means measuring cross-piece color match at the tray level, not inspecting the finished carton, and the Private Label Carton quote for it sits at USD 78-504.
Terms Behind a Private Label Carton Order
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 200-piece Private Label Carton order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, which is how the Private Label Carton account reads it at USD 78-504.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 78-504 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the private-label carton with hangtag format at 200 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, shipped as private-label carton with hangtag and certified GRA report.
Certification is GRA report for the lots that carry it, with a batch report and per-piece measurement of cross-piece color match for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, certified GRA report and packed private-label carton with hangtag at 200 pieces.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, priced at USD 78-504 for the 200-piece Private Label Carton run.
Alloy, Karat and the Cost of a Color Change
On custom Wedding Sets, the cheapest answer is rarely the cheapest outcome once the second season is counted, with GRA report and private-label carton with hangtag stated on the same sheet.
The commercial version of this question for custom Wedding Sets is simple: what does a failure cost the buyer, and who pays it. In our terms the answer is a replacement inside the same order cycle, with the retained reference tray as the arbiter, which the Private Label Carton file records at USD 78-504 in private-label carton with hangtag.
That clause matters more than a discount on custom Wedding Sets. A 4% lower unit price disappears on the first rejected tray; a written responsibility clause does not, the figure being USD 78-504 for a 200-piece run.
What a Report Proves and What It Does Not
A buyer who understands this about custom Wedding Sets negotiates differently, and usually negotiates less, shipped as private-label carton with hangtag and certified GRA report.
We run this check per tray rather than per carton because the defect that matters on custom Wedding Sets is the one that repeats. A single odd piece is noise; a pattern across one tray is a process problem and it will be in every tray made after it, the figure being USD 78-504 for a 200-piece run.
The report the buyer receives states the count per tray, the measured average and the outlier count for custom Wedding Sets. It is deliberately unglamorous, and it is the document that settles most disputes before they start, which is USD 78-504 on the Private Label Carton schedule.
The Calendar Behind a Private Label Carton Run
Nothing in this sequence is clever. Each step exists because skipping it cost somebody a claim on custom Wedding Sets at USD 78-504.
- Agree the stamp position, the hangtag copy and the box print before the first carton.
- Print the cartons and hangtags in one run: a sticker on a matte box reads as a repack.
- Set the barcode and the FNSKU mapping for every SKU before the label file is approved.
- Build the first carton at the quoted quantity so the pack-out is proven, not assumed.
- Hold a retained carton as the pack reference for every reorder.
MOQ is 50 pieces per design, low enough to test a category and high enough to keep the casting line accountable, and at USD 78-504 for 200 pieces that is the number the buyer signs.
The First Private Label Carton Order
Start with three designs at 50 pieces each. That covers the 200 pieces you need to read sell-through without betting on one model, and at USD 78-504 for 200 pieces that is the number the buyer signs.
Sample 3-5 days, bulk 15-20 days under 500 pieces, 200 pieces inside that window. The calendar is the same on every Private Label Carton run, shipped as private-label carton with hangtag and certified GRA report.
Getting private-label carton with hangtag to US wholesale
Sea freight costs roughly a third of air and takes three times the transit, which only makes sense for an SKU already selling in US wholesale, which is USD 78-504 on the Private Label Carton schedule.
FOB is the default and DDP is the option. Buyers new to US wholesale usually take DDP once and then switch after they see the breakdown, on a 200-piece Private Label Carton order at USD 78-504.
At receiving, count cartons, weigh one tray and measure ten pieces against cross-piece color match. Twenty minutes here saves a season of returns, with GRA report and private-label carton with hangtag stated on the same sheet, on a 200-piece Private Label Carton order at USD 78-504.
Frequently Asked Questions
What is the minimum order for custom Wedding Sets?
50 pieces per custom Wedding Set. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, quoted at USD 78-504 per piece in private-label carton with hangtag.
Do you supply certificates for custom Wedding Sets?
GRA report on custom Wedding Sets above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of cross-piece color match, which is what a counter or a listing actually needs, priced at USD 78-504 for the 200-piece Private Label Carton run.
How do you handle a rejected tray?
We replace or credit inside the same order cycle. The retained reference tray decides: if metal lot mismatch shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, and the Private Label Carton quote for it sits at USD 78-504.
What are the payment terms?
30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 78-504.
What is the minimum order for custom Wedding Sets?
50 pieces per custom Wedding Set. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, quoted at USD 78-504 per piece in private-label carton with hangtag.
Next Step
If the USD 78-504 band fits the shelf, send a drawing and we quote the 200-piece Private Label Carton run inside one business day.
HOLYCOME runs this line from Wuzhou, Guangxi, through Wuzhou HengliLai Jewelry Co., Ltd. Output is about 60,000 pieces a month across custom Wedding Sets and adjacent categories. service@holycome.com or WhatsApp +86 18078079070, with GRA report and private-label carton with hangtag stated on the same sheet.
Related reading: Gemstone Jewelry Vermeil Upgrade: Carton Cube, Duty and the Freight Line That Surpris - HOLYCOME Gemstone Jewelry Valentine Program: MOQ, Mixed Designs and the Real First Order - HOLYCOME




