Gemstone Jewelry · November 9, 2026 · 9 views

Gemstone Jewelry Made to Order: Sample to Container: The Real Calendar - HOLYCOME

Gemstone Jewelry Made to Order: Sample to Container: The Real Calendar - HOLYCOME

Sample to Container: The Real Calendar in the Made to Order Program

A US buyer of gemstone Jewelry sent us a competitor's gemstone Jewelry in November with one question: why does this fail at sieve drift after a season. We measured it, rebuilt the spec around size distribution within the declared sieve and zero girdle chips on arrival, and shipped 50 gemstone Jewelry that cleared inspection with zero rejects, shipped as single-piece foam box and certified IGI report.

The bench did not miss the defect, it was never asked to look for it. Sieve drift was absent from the purchase order, and a defect that is not named cannot be rejected on arrival, on a 50-piece Made to Order order at USD 3-118.

Gemstone Jewelry wholesale piece from the HOLYCOME line in Wuzhou

The rebuild held the USD 3-118 quote and changed the plating log, the gauge and the tray rule. Second run shipped single-piece foam box with zero rejects.

The Made-to-Order Path for gemstone Jewelry

Made-to-order is a different production line, not a slower version of stock. It starts with a signed drawing, then a wax or resin model, then a casting, then setting, then finish, and each stage can fail on its own, which is how the Made to Order account reads it at USD 3-118.

Twenty days is realistic for a new gemstone Jewelry when the model exists and only the stone changes. A new model adds a day for the CAD, a day for the print, and a day for the buyer to approve the render before metal is committed, on a 50-piece Made to Order order at USD 3-118.

The risk sits in approval, not in the bench. A buyer who approves a render on a phone screen and rejects the casting has bought a prototype, not a product. We send the render at 1:1 scale with a millimetre grid for that reason, quoted at USD 3-118 per piece in single-piece foam box.

Gemstone Jewelry setting and finish detail on a HOLYCOME factory sample

Three Failures That Reach the Made to Order Bench

mixed color lots

Mixing near-colorless and G-H stones in one parcel produces a finished piece with a visible tonal step. Parcels ship by single lot, certified IGI report and packed single-piece foam box at 50 pieces.

In a 50-piece run this typically shows on 8 of pieces. Catching it means measuring size distribution within the declared sieve at the tray level, not inspecting the finished carton, priced at USD 3-118 for the 50-piece Made to Order run.

girdle damage

Stones packed loose in a bag chip each other in transit. Individually wrapped parcels cost more and arrive usable, and the Made to Order quote for it sits at USD 3-118.

The commercial effect is replacement stones plus a sorting delay on the buyer's line. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, certified IGI report and packed single-piece foam box at 50 pieces.

sieve drift

A parcel sold as 2.0-2.2 mm with 15% of stones at 1.9 mm changes the setting labor on the buyer's bench. Sieve the parcel, do not sample it, quoted at USD 3-118 per piece in single-piece foam box.

Our countermeasure is a gauge and a written limit. It adds about 6 seconds per piece and removes the defect from the run rather than from the carton, with IGI report and single-piece foam box stated on the same sheet.

Four Spec Lines a Made to Order Buyer Checks

A Made to Order quote that states only metal and stone size leaves sieve drift undefined, and undefined is what gets rejected on arrival, quoted at USD 3-118 per piece in single-piece foam box.

Spec pointCommon trade outputHOLYCOME standardCost if missed
Clasp spring lifeSampled by handCycled 500 times on a jig per lotDetach claim and brand damage
Prong tension and seat depthChecked by feel at the benchPull-tested per piece, seat depth written on the sheetStone loss and total replacement
Hallmark depth and placementStamped where it fitsFixed position, depth measured so it never breaks the shankCustoms query and remaking
Solder flow at the jointNot inspectedJoint inspected under 10x before settingCrack at the seam in transit

Nothing here adds cost at USD 3-118. It adds documentation, and documentation is what the single-piece foam box carton is missing.

Terms Behind a Made to Order Order

The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 50-piece Made to Order order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, certified IGI report and packed single-piece foam box at 50 pieces.

Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 3-118 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.

Packing follows the single-piece foam box format at 50 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, and 50 pieces leaves Wuzhou in single-piece foam box at USD 3-118.

Certification is IGI report for the lots that carry it, with a batch report and per-piece measurement of size distribution within the declared sieve for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, which is how the Made to Order account reads it at USD 3-118.

A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, and at USD 3-118 for 50 pieces that is the number the buyer signs.

Cost Split on a Made to Order Piece at USD 3-118

Buyers assume the stone dominates the cost of a gemstone Jewelry. At wholesale it is closer to a quarter, and the labor line is where two quotes for the same drawing diverge by double digits, and 50 pieces leaves Wuzhou in single-piece foam box at USD 3-118.

Cost lineShareWhat moves it
Base metal or alloy for gemstone Jewelry32%Alloy choice and casting yield
Stone or melee for gemstone Jewelry23%Sieve range and lot batching
Setting and finishing labor for gemstone Jewelry21%Jig design and bench minutes
Plating, polish and QC for gemstone Jewelry14%Per-tray versus per-piece checks
Packaging for gemstone Jewelry10%single-piece foam box

The cheapest quote for gemstone Jewelry usually hides its saving in the plating line and the stone grade. Both show up in the second season, not the first, which is how the Made to Order account reads it at USD 3-118.

Carton Cube, Duty and the Freight Line That Surprises Buyers

Buyers in the American bridal market tend to over-index on unit price for gemstone Jewelry and under-index on what happens after delivery, which is USD 3-118 on the Made to Order schedule.

Three numbers decide it for gemstone Jewelry: the tolerance band, the inspection density and the responsibility clause. Write all three down and the rest of the negotiation is arithmetic. Leave any of them out and it becomes a discussion about intent, shipped as single-piece foam box and certified IGI report.

We send a one-page sheet with every gemstone Jewelry quote that states those three, plus the retained-tray rule. Buyers who compare on it usually find that the gap between suppliers is smaller than the gap between the specs they were comparing, and the Made to Order quote for it sits at USD 3-118.

Alloy, Karat and the Cost of a Color Change

This is where gemstone Jewelry stops being a commodity and starts being a supply relationship, which is how the Made to Order account reads it at USD 3-118.

There is a version of this that looks cheaper on paper and costs more in practice: quoting the best case on gemstone Jewelry and letting the buyer discover the spread. It works once. The second order goes to whichever supplier quoted honestly, certified IGI report and packed single-piece foam box at 50 pieces.

We would rather lose a first order of gemstone Jewelry on price than explain a defect after it lands. That position is unusual in this category and it is the reason our reorder share is high, and 50 pieces leaves Wuzhou in single-piece foam box at USD 3-118.

The First Made to Order Order

The first order should be small enough to inspect completely and large enough to keep the gauge check independent of the shift, and at USD 3-118 for 50 pieces that is the number the buyer signs.

Sample in 3-5 days, bulk in 15-20 days under 500 pieces. At 50 pieces the calendar is the same on every Made to Order run, quoted at USD 3-118 per piece in single-piece foam box.

Getting single-piece foam box to the American bridal market

For a Made to Order order at 50 pieces the carton count decides the freight more than the weight does. single-piece foam box packs tighter than a display tray, and 50 pieces leaves Wuzhou in single-piece foam box at USD 3-118.

The freight rate matters less than the clearance terms at USD 3-118 per piece. A duty surprise can cost more than the entire freight line.

At receiving, count cartons, weigh one tray of single-piece foam box and measure ten pieces against size distribution within the declared sieve. Twenty minutes here saves a season, the figure being USD 3-118 for a 50-piece run.

The Calendar Behind a Made to Order Run

The calendar below is what we quote on a 50-piece run of gemstone Jewelry. It starts when the spec is signed, not when the deposit clears, certified IGI report and packed single-piece foam box at 50 pieces.

  1. Sign the drawing at 1:1 scale with a millimetre grid, not a phone render.
  2. Cut the model in wax or resin and photograph it on the gauge before metal is committed.
  3. Cast the first article, set the stones and finish it exactly as bulk will be finished.
  4. Send the first article for approval with the weight and the stone measurements stated.
  5. Run the balance of the order in 25-30 days, holding the approved article as the reference.
  6. Ship with the approved article photographed beside a production piece from the same tray.

MOQ stays at 50 pieces per design on the Made to Order program, low enough to test a category and high enough to keep the casting line accountable, shipped as single-piece foam box and certified IGI report.

Frequently Asked Questions

Can you ship DDP?

DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, with IGI report and single-piece foam box stated on the same sheet.

How long does a reorder of the same gemstone Jewelry take?

With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, shipped as single-piece foam box and certified IGI report.

What finish do you use, and how thick is it?

Rhodium at 0.20 micron minimum on white gemstone Jewelry, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, quoted at USD 3-118 per piece in single-piece foam box.

How is gemstone Jewelry packed for single-piece foam box?

Every unit goes into a foam-backed pouch, then the single-piece foam box, then the outer carton at 50 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, which is how the Made to Order account reads it at USD 3-118.

Can you ship DDP?

DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, with IGI report and single-piece foam box stated on the same sheet.

Next Step

Send one drawing or one competitor sample with your target landed cost. We answer with a tolerance sheet, a cost breakdown and a production calendar in two business days, on a 50-piece Made to Order order at USD 3-118.

HOLYCOME runs this line from Wuzhou, Guangxi, through Wuzhou HengliLai Jewelry Co., Ltd. Output is about 60,000 pieces a month across gemstone Jewelry and adjacent categories. service@holycome.com or WhatsApp +86 18078079070, the figure being USD 3-118 for a 50-piece run.

Related reading: Gemstone Jewelry Private Label Carton: AQL, Tray Checks and What a QC Report Should S - HOLYCOME 18K Gold Rings Q4 Holiday Stock: What the Quote Actually Covers - HOLYCOME

Need a quote for your next order?

Get Wholesale Pricing

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .