Lab Diamond Necklaces · November 9, 2026 · 9 views

Lab Diamond Necklaces Made to Order: Sample to Container: The Real Calendar - HOLYCOME

Lab Diamond Necklaces Made to Order: Sample to Container: The Real Calendar - HOLYCOME

Sample to Container: The Real Calendar in the Made to Order Program

A US buyer of lab Diamond Necklaces sent us a competitor's lab Diamond Necklace in September with one question: why does this fail at clasp fatigue after a season. We measured it, rebuilt the spec around clasp pull strength and chain length within +/-3 mm, and shipped 50 lab Diamond Necklaces that cleared inspection with zero rejects, on a 50-piece Made to Order order at USD 32-225.

That rejection was avoidable at the drawing stage. Clasp fatigue belongs on the spec sheet next to the stone size, not in the claim email three weeks after arrival, on a 50-piece Made to Order order at USD 32-225.

Lab Diamond Necklaces wholesale piece from the HOLYCOME line in Wuzhou

We kept the Made to Order price and changed the four measurements that matter. The rebuild cost about 16 seconds per piece and removed the whole claim conversation, certified IGI report and packed single-piece foam box at 50 pieces.

The Made-to-Order Path for lab Diamond Necklaces

Made-to-order is a different production line, not a slower version of stock. It starts with a signed drawing, then a wax or resin model, then a casting, then setting, then finish, and each stage can fail on its own, which is how the Made to Order account reads it at USD 32-225.

Twenty days is realistic for a new lab Diamond Necklace when the model exists and only the stone changes. A new model adds a day for the CAD, a day for the print, and a day for the buyer to approve the render before metal is committed, and 50 pieces leaves Wuzhou in single-piece foam box at USD 32-225.

The risk sits in approval, not in the bench. A buyer who approves a render on a phone screen and rejects the casting has bought a prototype, not a product. We send the render at 1:1 scale with a millimetre grid for that reason, quoted at USD 32-225 per piece in single-piece foam box.

Lab Diamond Necklaces setting and finish detail on a HOLYCOME factory sample

Three Failures That Reach the Made to Order Bench

link stretch

Chain stretch starts at the link join where the wire was drawn thin to save metal. Measuring wire diameter at both ends of a run catches it before shipping, and the Made to Order quote for it sits at USD 32-225.

In a 50-piece run this typically shows on 8 of pieces. Catching it means measuring clasp pull strength at the tray level, not inspecting the finished carton, and 50 pieces leaves Wuzhou in single-piece foam box at USD 32-225.

pendant bail shadow

A bail plated in a separate barrel than the chain shows a different white tone under store light. Plating a set in one barrel is the fix, which is how the Made to Order account reads it at USD 32-225.

The commercial effect is clasp replacement plus a goodwill credit, typically USD 7-12 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, which is USD 32-225 on the Made to Order schedule.

clasp fatigue

A spring clasp rated by catalog rather than by pull test opens after 40-60 wear cycles. The rating belongs on the spec sheet, not on the website, and at USD 32-225 for 50 pieces that is the number the buyer signs.

Our countermeasure is a gauge and a written limit. It adds about 16 seconds per piece and removes the defect from the run rather than from the carton, the figure being USD 32-225 for a 50-piece run.

Four Spec Lines a Made to Order Buyer Checks

The Made to Order buyer signs on four numbers. The table puts the trade default beside our standard so the difference is visible before the deposit, which is how the Made to Order account reads it at USD 32-225.

Spec pointCommon trade outputHOLYCOME standardCost if missed
Clasp spring lifeSampled by handCycled 500 times on a jig per lotDetach claim and brand damage
Prong tension and seat depthChecked by feel at the benchPull-tested per piece, seat depth written on the sheetStone loss and total replacement
Hallmark depth and placementStamped where it fitsFixed position, depth measured so it never breaks the shankCustoms query and remaking
Solder flow at the jointNot inspectedJoint inspected under 10x before settingCrack at the seam in transit

None of the four adds cost at USD 32-225. They add about 16 seconds per piece and remove the reason to inspect twice.

Terms Behind a Made to Order Order

The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 50-piece Made to Order order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, certified IGI report and packed single-piece foam box at 50 pieces.

Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 32-225 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.

Packing follows the single-piece foam box format at 50 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, and 50 pieces leaves Wuzhou in single-piece foam box at USD 32-225.

Certification is IGI report for the lots that carry it, with a batch report and per-piece measurement of clasp pull strength for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, and 50 pieces leaves Wuzhou in single-piece foam box at USD 32-225.

A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, and at USD 32-225 for 50 pieces that is the number the buyer signs.

Cost Split on a Made to Order Piece at USD 32-225

At USD 32-225 per piece for lab Diamond Necklaces, the stone sits near a quarter and the labor line moves by double digits between two quotes for one drawing.

Cost lineShareWhat moves it
Base metal or alloy for lab Diamond Necklaces32%Alloy choice and casting yield
Stone or melee for lab Diamond Necklaces23%Sieve range and lot batching
Setting and finishing labor for lab Diamond Necklaces21%Jig design and bench minutes
Plating, polish and QC for lab Diamond Necklaces14%Per-tray versus per-piece checks
Packaging for lab Diamond Necklaces10%single-piece foam box

The saving in the cheapest quote hides in plating and stone grade. At 50 pieces that saving is visible in season two, and the Made to Order quote for it sits at USD 32-225.

Carton Cube, Duty and the Freight Line That Surprises Buyers

Every year we see the same omission in lab Diamond Necklaces spec sheets, and every year it costs a buyer a season, and 50 pieces leaves Wuzhou in single-piece foam box at USD 32-225.

Three numbers decide it for lab Diamond Necklaces: the tolerance band, the inspection density and the responsibility clause. Write all three down and the rest of the negotiation is arithmetic. Leave any of them out and it becomes a discussion about intent, shipped as single-piece foam box and certified IGI report.

We send a one-page sheet with every lab Diamond Necklaces quote that states those three, plus the retained-tray rule. Buyers who compare on it usually find that the gap between suppliers is smaller than the gap between the specs they were comparing, which the Made to Order file records at USD 32-225 in single-piece foam box.

Alloy, Karat and the Cost of a Color Change

The number is less interesting than the rule behind it, and lab Diamond Necklaces is where that rule gets tested, which is how the Made to Order account reads it at USD 32-225.

There is a version of this that looks cheaper on paper and costs more in practice: quoting the best case on lab Diamond Necklaces and letting the buyer discover the spread. It works once. The second order goes to whichever supplier quoted honestly, shipped as single-piece foam box and certified IGI report.

We would rather lose a first order of lab Diamond Necklaces on price than explain a defect after it lands. That position is unusual in this category and it is the reason our reorder share is high, and the Made to Order quote for it sits at USD 32-225.

The First Made to Order Order

Start with three designs at 50 pieces each. That covers the 50 pieces you need to read sell-through without betting on one model, and at USD 32-225 for 50 pieces that is the number the buyer signs.

Sample 3-5 days, bulk 15-20 days under 500 pieces, 50 pieces inside that window. The calendar is the same on every Made to Order run, on a 50-piece Made to Order order at USD 32-225.

Getting single-piece foam box to US e-commerce

Sea freight costs roughly a third of air and takes three times the transit, which only makes sense for an SKU already selling in US e-commerce, certified IGI report and packed single-piece foam box at 50 pieces, which the Made to Order file records at USD 32-225 in single-piece foam box.

FOB is the default and DDP is the option. Buyers new to US e-commerce usually take DDP once and then switch after they see the breakdown, the figure being USD 32-225 for a 50-piece run.

At receiving, count cartons, weigh one tray and measure ten pieces against clasp pull strength. Twenty minutes here saves a season of returns, shipped as single-piece foam box and certified IGI report, certified IGI report and packed single-piece foam box at 50 pieces.

The Calendar Behind a Made to Order Run

Nothing in this sequence is clever. Each step exists because skipping it cost somebody a claim on lab Diamond Necklaces at USD 32-225.

  1. Sign the drawing at 1:1 scale with a millimetre grid, not a phone render.
  2. Cut the model in wax or resin and photograph it on the gauge before metal is committed.
  3. Cast the first article, set the stones and finish it exactly as bulk will be finished.
  4. Send the first article for approval with the weight and the stone measurements stated.
  5. Run the balance of the order in 25-30 days, holding the approved article as the reference.
  6. Ship with the approved article photographed beside a production piece from the same tray.

MOQ is 50 pieces per design, low enough to test a category and high enough to keep the casting line accountable, quoted at USD 32-225 per piece in single-piece foam box.

Frequently Asked Questions

Can you ship DDP?

DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, with IGI report and single-piece foam box stated on the same sheet.

How long does a reorder of the same lab Diamond Necklace take?

With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, shipped as single-piece foam box and certified IGI report.

What finish do you use, and how thick is it?

Rhodium at 0.20 micron minimum on white lab Diamond Necklaces, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, priced at USD 32-225 for the 50-piece Made to Order run.

How is lab Diamond Necklaces packed for single-piece foam box?

Every unit goes into a foam-backed pouch, then the single-piece foam box, then the outer carton at 50 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, which is how the Made to Order account reads it at USD 32-225.

Can you ship DDP?

DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, with IGI report and single-piece foam box stated on the same sheet.

Next Step

If the USD 32-225 band fits the shelf, send a drawing and we quote the 50-piece Made to Order run inside one business day.

HOLYCOME runs this line from Wuzhou, Guangxi, through Wuzhou HengliLai Jewelry Co., Ltd. Output is about 60,000 pieces a month across lab Diamond Necklaces and adjacent categories. service@holycome.com or WhatsApp +86 18078079070, quoted at USD 32-225 per piece in single-piece foam box.

Related reading: Lab Diamond Necklaces Private Label Carton: AQL, Tray Checks and What a QC Report Sho - HOLYCOME Luxury Earrings Q4 Holiday Stock: What the Quote Actually Covers - HOLYCOME

Need a quote for your next order?

Get Wholesale Pricing

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .