AQL, Tray Checks and What a QC Report Should Say in the Private Label Carton Program
A US buyer of luxury Earrings came to us after 200 luxury Earrings from a trading company produced 11 rejects in the first inspection. The defect was not cosmetic: stamp accuracy had drifted far enough that the buyer's own bench could not correct it without recutting, shipped as private-label carton with hangtag and certified GRA report.
At 200 pieces the buyer was not buying a defect, they were buying a document. The Private Label Carton order carried a photo and a price, and stamp accuracy had nowhere to live, which the Private Label Carton file records at USD 54-384 in private-label carton with hangtag.
Our rebuild kept the buyer's retail price and changed four numbers on the bench. The next run cleared inspection because the specification traveled with the tray, not with a phone call, the figure being USD 54-384 for a 200-piece run.
Four Spec Lines a Private Label Carton Buyer Checks
Most quotes describe the luxury Earring and skip the part that determines the buyer's margin. Those four lines are listed below with the trade default beside our standard, shipped as private-label carton with hangtag and certified GRA report, and the Private Label Carton quote for it sits at USD 54-384.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Stone colour consistency | Graded by eye under D65 | Colour matched to a retained master stone, per tray | Repeat colour complaint in the same SKU |
| Sizing drift across the run | Not measured | Go/no-go gauge on every size, drift held under 0.15 mm | Resize queue and reship cost |
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
Write these four into the purchase order and the argument after delivery becomes arithmetic rather than recollection, and at USD 54-384 for 200 pieces that is the number the buyer signs.
Private Label Packaging for luxury Earrings
Private label changes four things and none of them is the piece: the stamp, the hangtag, the box and the barcode. Get those four aligned before the first bulk run or the carton arrives with your name spelled two ways, with GRA report and private-label carton with hangtag stated on the same sheet.
The stamp goes inside the shank or on the clasp tag, and it has to be small enough not to break the surface on a thin luxury Earring. Below 0.8 mm of shank width we recommend the hangtag only, which the Private Label Carton file records at USD 54-384 in private-label carton with hangtag.
Cartons are quoted at 200 pieces with the label printed, not stickered, because a sticker on a matte box reads as a repack. Lead time adds three days for the print run, which is why private label starts later than stock, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 54-384.
Cost Split on a Private Label Carton Piece at USD 54-384
At USD 54-384 per piece for luxury Earrings, the stone is roughly a quarter and labor is where two quotes for the same drawing diverge.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for luxury Earrings | 32% | Alloy choice and casting yield |
| Stone or melee for luxury Earrings | 23% | Sieve range and lot batching |
| Setting and finishing labor for luxury Earrings | 21% | Jig design and bench minutes |
| Plating, polish and QC for luxury Earrings | 14% | Per-tray versus per-piece checks |
| Packaging for luxury Earrings | 10% | private-label carton with hangtag |
The saving in the cheapest luxury Earrings quote hides in the plating line and the stone grade. Both appear in season two, not on arrival, on a 200-piece Private Label Carton order at USD 54-384.
Three Failures That Reach the Private Label Carton Bench
solder joint porosity
A sizing joint soldered with too much flux pits after polish and cracks in wear. Joint inspection belongs in the final QC, not the bench, and at USD 54-384 for 200 pieces that is the number the buyer signs.
The commercial effect is refining loss plus a legal stamp correction, typically USD 15-28 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, quoted at USD 54-384 per piece in private-label carton with hangtag.
stamp accuracy
A 14K stamp on 13.6K metal is a legal exposure, not a cosmetic one. Assay per lot is the only defensible check, on a 200-piece Private Label Carton order at USD 54-384.
Our countermeasure is a gauge and a written limit. It adds about 21 seconds per piece and removes the defect from the run rather than from the carton, which the Private Label Carton file records at USD 54-384 in private-label carton with hangtag.
alloy color drift
Two alloy lots of 14K rose can read peach and copper under the same light. Holding a master color chip per order keeps a collection coherent, which is how the Private Label Carton account reads it at USD 54-384.
In a 200-piece run this typically shows on 11 of pieces. Catching it means measuring assay within 0.3K of the stamp at the tray level, not inspecting the finished carton, and the Private Label Carton quote for it sits at USD 54-384.
Terms Behind a Private Label Carton Order
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 200-piece Private Label Carton order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, the figure being USD 54-384 for a 200-piece run.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 54-384 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the private-label carton with hangtag format at 200 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, with GRA report and private-label carton with hangtag stated on the same sheet.
Certification is GRA report for the lots that carry it, with a batch report and per-piece measurement of assay within 0.3K of the stamp for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, with GRA report and private-label carton with hangtag stated on the same sheet.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, which the Private Label Carton file records at USD 54-384 in private-label carton with hangtag.
Alloy, Karat and the Cost of a Color Change
In US e-commerce, this is the single most negotiated line on luxury Earrings and the least documented one, and the Private Label Carton quote for it sits at USD 54-384.
The commercial version of this question for luxury Earrings is simple: what does a failure cost the buyer, and who pays it. In our terms the answer is a replacement inside the same order cycle, with the retained reference tray as the arbiter, priced at USD 54-384 for the 200-piece Private Label Carton run.
That clause matters more than a discount on luxury Earrings. A 4% lower unit price disappears on the first rejected tray; a written responsibility clause does not, certified GRA report and packed private-label carton with hangtag at 200 pieces.
What a Report Proves and What It Does Not
Nobody quotes it for luxury Earrings until something goes wrong, which is exactly why it belongs in the first email, and at USD 54-384 for 200 pieces that is the number the buyer signs.
We run this check per tray rather than per carton because the defect that matters on luxury Earrings is the one that repeats. A single odd piece is noise; a pattern across one tray is a process problem and it will be in every tray made after it, the figure being USD 54-384 for a 200-piece run.
The report the buyer receives states the count per tray, the measured average and the outlier count for luxury Earrings. It is deliberately unglamorous, and it is the document that settles most disputes before they start, which the Private Label Carton file records at USD 54-384 in private-label carton with hangtag.
The Calendar Behind a Private Label Carton Run
For private-label carton with hangtag at 200 pieces, the sequence is fixed and the dates are the only thing that moves, certified GRA report and packed private-label carton with hangtag at 200 pieces.
- Agree the stamp position, the hangtag copy and the box print before the first carton.
- Print the cartons and hangtags in one run: a sticker on a matte box reads as a repack.
- Set the barcode and the FNSKU mapping for every SKU before the label file is approved.
- Build the first carton at the quoted quantity so the pack-out is proven, not assumed.
- Hold a retained carton as the pack reference for every reorder.
MOQ stays at 50 pieces per design on luxury Earrings, low enough to test a shelf and high enough to keep the gauge check independent, priced at USD 54-384 for the 200-piece Private Label Carton run.
The First Private Label Carton Order
The point of a small first run is not the margin. It is finding out whether the supplier's paperwork survives contact with the actual goods, which the Private Label Carton file records at USD 54-384 in private-label carton with hangtag.
The first order is the cheapest inspection a buyer will ever run, because the volume is small enough to check every tray by hand, quoted at USD 54-384 per piece in private-label carton with hangtag.
Getting private-label carton with hangtag to US e-commerce
Export runs through Guangzhou or Shenzhen. For Private Label Carton orders the GRA report file travels with the shipping documents, not separately, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 54-384.
The clearance term matters more than the rate at 200 pieces. A duty surprise can cost more than the whole freight line, quoted at USD 54-384 per piece in private-label carton with hangtag.
The arrival check is three steps: count cartons against the packing list, weigh a sample tray, and measure ten pieces against assay within 0.3K of the stamp and color match to the master chip, which is how the Private Label Carton account reads it at USD 54-384.
Frequently Asked Questions
What is the minimum order for luxury Earrings?
50 pieces per luxury Earring. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 54-384.
Do you supply certificates for luxury Earrings?
GRA report on luxury Earrings above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of assay within 0.3K of the stamp, which is what a counter or a listing actually needs, which is USD 54-384 on the Private Label Carton schedule.
How do you handle a rejected tray?
We replace or credit inside the same order cycle. The retained reference tray decides: if stamp accuracy shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, and at USD 54-384 for 200 pieces that is the number the buyer signs.
What are the payment terms?
30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, certified GRA report and packed private-label carton with hangtag at 200 pieces.
What is the minimum order for luxury Earrings?
50 pieces per luxury Earring. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 54-384.
Next Step
If the USD 54-384 band fits your shelf, send the drawing and we will quote the 200-piece Private Label Carton run inside one business day.
HOLYCOME runs this line from Wuzhou, Guangxi, through Wuzhou HengliLai Jewelry Co., Ltd. Output is about 60,000 pieces a month across luxury Earrings and adjacent categories. service@holycome.com or WhatsApp +86 18078079070, which is how the Private Label Carton account reads it at USD 54-384.
Related reading: Gold Bracelets Vermeil Upgrade: Carton Cube, Duty and the Freight Line That Surprises - HOLYCOME Gold Bracelets Valentine Program: MOQ, Mixed Designs and the Real First Order - HOLYCOME




