How the Second Order Becomes Cheaper
Last April, a US buyer of pT950 Platinum placed 800 pT950 Platinum against a sample signed in August. The first container landed with 9 pieces that failed on stamp accuracy alone, and USD 25-95 landed on the buyer's P&L before a single unit sold, quoted at USD 42-304 per piece in bulk carton, 50 per bag.
The incoming report named stamp accuracy and the purchase order did not. On a Distributor Tier run that gap between documents is the whole reason a tray fails inspection, and at USD 42-304 for 800 pieces that is the number the buyer signs.
We did not touch the retail price. We changed what travels with the bulk carton, 50 per bag carton, and the Distributor Tier account stopped re-inspecting every tray, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 42-304.
Where USD 42-304 Per Piece Actually Goes
At USD 42-304 per piece there is no room for hidden cost. The table shows where the money sits and which line a supplier can actually compress.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for pT950 Platinum | 30% | Alloy choice and casting yield |
| Stone or melee for pT950 Platinum | 20% | Sieve range and lot batching |
| Setting and finishing labor for pT950 Platinum | 19% | Jig design and bench minutes |
| Plating, polish and QC for pT950 Platinum | 12% | Per-tray versus per-piece checks |
| Packaging for pT950 Platinum | 19% | bulk carton, 50 per bag |
A supplier with no bench minutes per piece has never costed pT950 Platinum. Ask for minutes and the reject rule before you ask for a discount, the figure being USD 42-304 for a 800-piece run.
What US buyers Check Before They Sign
A quote for pT950 Platinum usually states carat weight or metal type, and stops there. The four points below are what actually decide whether a run sells through or comes back, which the Distributor Tier file records at USD 42-304 in bulk carton, 50 per bag.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
| Hallmark depth and placement | Stamped where it fits | Fixed position, depth measured so it never breaks the shank | Customs query and remaking |
| Solder flow at the joint | Not inspected | Joint inspected under 10x before setting | Crack at the seam in transit |
Each line above is a gauge check, not a marketing claim. A factory that cannot state them in numbers is quoting an opinion about pT950 Platinum, quoted at USD 42-304 per piece in bulk carton, 50 per bag.
Distributor Pricing Tiers on pT950 Platinum
A distributor does not buy a pT950 Platinum, they buy a position. Tier pricing is quoted against annual volume with a floor per SKU, and the tier is reviewed on shipped units rather than on forecast, priced at USD 42-304 for the 800-piece Distributor Tier run.
What the tier buys is protection: a defined territory, a no-direct-sell clause inside that territory, and a first look at new models for one season. Without those three lines the discount is just a lower price and the distributor will not hold stock for you, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
Turn is the number the distributor manages. At USD 42-304 per piece and a 45-day turn, the margin per shelf foot is thin. That is why bulk orders of pT950 Platinum move in 800-piece lots rather than in the 50-piece sample quantity.
The Three Failures We See Most in Incoming Samples
stamp accuracy
A 14K stamp on 13.6K metal is a legal exposure, not a cosmetic one. Assay per lot is the only defensible check, the figure being USD 42-304 for a 800-piece run.
The commercial effect is refining loss plus a legal stamp correction, typically USD 15-28 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, and the Distributor Tier quote for it sits at USD 42-304.
alloy color drift
Two alloy lots of 14K rose can read peach and copper under the same light. Holding a master color chip per order keeps a collection coherent, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
Our countermeasure is a gauge and a written limit. It adds about 21 seconds per piece and removes the defect from the run rather than from the carton, priced at USD 42-304 for the 800-piece Distributor Tier run.
solder joint porosity
A sizing joint soldered with too much flux pits after polish and cracks in wear. Joint inspection belongs in the final QC, not the bench, quoted at USD 42-304 per piece in bulk carton, 50 per bag.
In a 800-piece run this typically shows on 14 of pieces. Catching it means measuring assay within 0.3K of the stamp at the tray level, not inspecting the finished carton, which is how the Distributor Tier account reads it at USD 42-304.
Order Terms, Sample Timing and Packing
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 800-piece Distributor Tier order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 42-304.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 42-304 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the bulk carton, 50 per bag format at 800 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
Certification is SGS batch report for the lots that carry it, with a batch report and per-piece measurement of assay within 0.3K of the stamp for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, which is how the Distributor Tier account reads it at USD 42-304.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, priced at USD 42-304 for the 800-piece Distributor Tier run.
What the Quote Actually Covers
Buyers in the American bridal market tend to over-index on unit price for pT950 Platinum and under-index on what happens after delivery, and the Distributor Tier quote for it sits at USD 42-304.
One practical note on timing for pT950 Platinum: the calendar starts when the spec is signed, not when the deposit clears. A buyer who signs in week one and pays in week three gets the goods in week five, certified SGS batch report and packed bulk carton, 50 per bag at 800 pieces.
We date the pT950 Platinum proforma from signature for that reason, and we state the deposit deadline in the same email that carries the spec sheet, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 42-304.
MOQ, Mixed Designs and the Real First Order
This is where pT950 Platinum stops being a commodity and starts being a supply relationship, which is USD 42-304 on the Distributor Tier schedule.
In the American bridal market terms, this is the difference between a landed cost the buyer can plan against and a number that moves after the container ships. For pT950 Platinum, we publish the figure per SKU and hold it for the order window rather than for the calendar year, which is USD 42-304 on the Distributor Tier schedule.
Practically, it shows up in three places for pT950 Platinum: the proforma, the QC sheet and the credit note if something goes wrong. All three should quote the same number. When they do not, the argument is about paperwork, not about the product, which is USD 42-304 on the Distributor Tier schedule.
How a Repeat Order Gets Built
Nothing in this sequence is clever. Each step exists because skipping it produced a specific failure on a previous order of pT950 Platinum, shipped as bulk carton, 50 per bag and certified SGS batch report, shipped as bulk carton, 50 per bag and certified SGS batch report.
- Lock the spec: metal, stone size range, plating thickness, sizing band and finish, all written on one sheet.
- Pull a stock-component sample in 3-5 days and measure it against that sheet, not against the photo.
- Approve the sample in writing, including the reject rule and the retained reference tray.
- Run bulk in 15-20 days for orders under 500 pieces, with the gauge check independent of the shift.
- Ship from Guangzhou or Shenzhen with the QC sheet in the carton and the batch report by email.
Reorders run 12-15 days because the model, the gauge set and the signed spec stay in our system between the Distributor Tier runs, and the Distributor Tier quote for it sits at USD 42-304.
Freight, Duty and the Arrival Check
At 800 pieces the carton count drives freight more than the weight. bulk carton, 50 per bag packs tighter than a display tray and saves a pallet position, and the Distributor Tier quote for it sits at USD 42-304.
FOB Guangzhou or Shenzhen is the default on pT950 Platinum. Buyers new to the American bridal market take DDP once and switch after they see the breakdown, on a 800-piece Distributor Tier order at USD 42-304.
If stamp accuracy shows in the arrival check, the retained tray decides ownership. Keep the SGS batch report sheet beside the packing list, and the Distributor Tier quote for it sits at USD 42-304.
What This Means for a First Order
A first order of 50 pieces per design is a measurement, not a purchase. It shows how assay within 0.3K of the stamp and color match to the master chip behaves on this line and whether the QC sheet matches the carton, priced at USD 42-304 for the 800-piece Distributor Tier run.
Six weeks of testing is cheaper than a season of returns on pT950 Platinum. That is the entire argument for a small first order, and the Distributor Tier quote for it sits at USD 42-304.
Frequently Asked Questions
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white pT950 Platinum, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, which is USD 42-304 on the Distributor Tier schedule.
How is pT950 Platinum packed for bulk carton, 50 per bag?
Every unit goes into a foam-backed pouch, then the bulk carton, 50 per bag, then the outer carton at 800 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, on a 800-piece Distributor Tier order at USD 42-304.
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, which is how the Distributor Tier account reads it at USD 42-304.
How long does a reorder of the same pT950 Platinum take?
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, with SGS batch report and bulk carton, 50 per bag stated on the same sheet.
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white pT950 Platinum, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, which is USD 42-304 on the Distributor Tier schedule.
Next Step
Put your current quote beside ours on assay within 0.3K of the stamp and color match to the master chip, plating thickness, dimensional tolerance and the reject rule. The comparison usually settles it quickly, and 800 pieces leaves Wuzhou in bulk carton, 50 per bag at USD 42-304.
HOLYCOME is operated by Wuzhou HengliLai Jewelry Co., Ltd., a factory in Wuzhou, Guangxi, producing since 2009 at roughly 60,000 pieces a month. Contact service@holycome.com or WhatsApp +86 18078079070, which the Distributor Tier file records at USD 42-304 in bulk carton, 50 per bag.
Related reading: PT950 Platinum Trade Show Sample: The Reject Tray Policy That Decides a Partnership - HOLYCOME Custom Wedding Sets Shopify DTC: What a Report Proves and What It Does Not - HOLYCOME




