AQL, Tray Checks and What a QC Report Should Say
The brief was simple: 200 pT950 Platinum, 10K/14K/18K gold, delivered before July. The run that arrived carried 17 pieces with stamp accuracy, and the buyer spent USD 30-110 on sorting before the goods reached a shelf, quoted at USD 54-384 per piece in private-label carton with hangtag.
Nobody on that bench was careless. They were working to a spec that existed only in a photograph, and stamp accuracy is what a photograph fails to define, which is USD 54-384 on the Private Label Carton schedule.
The fix cost about 21 seconds per pT950 Platinum and removed the credit note entirely. That is the whole economics of a spec sheet, and it is why we write one on every quote, on a 200-piece Private Label Carton order at USD 54-384.
What US buyers Check Before They Sign
Four lines decide whether pT950 Platinum at USD 54-384 sells through or comes back, and none of them appears on a typical trading-company quote.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Stone colour consistency | Graded by eye under D65 | Colour matched to a retained master stone, per tray | Repeat colour complaint in the same SKU |
| Sizing drift across the run | Not measured | Go/no-go gauge on every size, drift held under 0.15 mm | Resize queue and reship cost |
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
Put these four into the purchase order and the Private Label Carton argument after delivery becomes arithmetic, and the Private Label Carton quote for it sits at USD 54-384.
Private Label Packaging for pT950 Platinum
Private label changes four things and none of them is the piece: the stamp, the hangtag, the box and the barcode. Get those four aligned before the first bulk run or the carton arrives with your name spelled two ways, which is how the Private Label Carton account reads it at USD 54-384.
The stamp goes inside the shank or on the clasp tag, and it has to be small enough not to break the surface on a thin pT950 Platinum. Below 0.8 mm of shank width we recommend the hangtag only, which is USD 54-384 on the Private Label Carton schedule.
Cartons are quoted at 200 pieces with the label printed, not stickered, because a sticker on a matte box reads as a repack. Lead time adds three days for the print run, which is why private label starts later than stock, certified GRA report and packed private-label carton with hangtag at 200 pieces.
Where USD 54-384 Per Piece Actually Goes
Cost per piece at USD 54-384 leaves little room for assumption. The table shows which line compresses and which one only moves quality.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for pT950 Platinum | 30% | Alloy choice and casting yield |
| Stone or melee for pT950 Platinum | 20% | Sieve range and lot batching |
| Setting and finishing labor for pT950 Platinum | 19% | Jig design and bench minutes |
| Plating, polish and QC for pT950 Platinum | 12% | Per-tray versus per-piece checks |
| Packaging for pT950 Platinum | 19% | private-label carton with hangtag |
A factory with no bench minutes per piece has never costed pT950 Platinum at USD 54-384. Ask for minutes and for the reject rule.
The Three Failures We See Most in Incoming Samples
solder joint porosity
A sizing joint soldered with too much flux pits after polish and cracks in wear. Joint inspection belongs in the final QC, not the bench, priced at USD 54-384 for the 200-piece Private Label Carton run.
In a 200-piece run this typically shows on 17 of pieces. Catching it means measuring assay within 0.3K of the stamp at the tray level, not inspecting the finished carton, certified GRA report and packed private-label carton with hangtag at 200 pieces.
stamp accuracy
A 14K stamp on 13.6K metal is a legal exposure, not a cosmetic one. Assay per lot is the only defensible check, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 54-384.
The commercial effect is refining loss plus a legal stamp correction, typically USD 15-28 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, and at USD 54-384 for 200 pieces that is the number the buyer signs.
alloy color drift
Two alloy lots of 14K rose can read peach and copper under the same light. Holding a master color chip per order keeps a collection coherent, the figure being USD 54-384 for a 200-piece run.
Our countermeasure is a gauge and a written limit. It adds about 21 seconds per piece and removes the defect from the run rather than from the carton, shipped as private-label carton with hangtag and certified GRA report.
Order Terms, Sample Timing and Packing
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 200-piece Private Label Carton order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, on a 200-piece Private Label Carton order at USD 54-384.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 54-384 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the private-label carton with hangtag format at 200 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, which is how the Private Label Carton account reads it at USD 54-384.
Certification is GRA report for the lots that carry it, with a batch report and per-piece measurement of assay within 0.3K of the stamp for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, which is how the Private Label Carton account reads it at USD 54-384.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, shipped as private-label carton with hangtag and certified GRA report.
Alloy, Karat and the Cost of a Color Change
On pT950 Platinum, the difference between a 40-day order and a 90-day order is usually two signatures, not a factory delay, shipped as private-label carton with hangtag and certified GRA report.
The commercial version of this question for pT950 Platinum is simple: what does a failure cost the buyer, and who pays it. In our terms the answer is a replacement inside the same order cycle, with the retained reference tray as the arbiter, certified GRA report and packed private-label carton with hangtag at 200 pieces.
That clause matters more than a discount on pT950 Platinum. A 4% lower unit price disappears on the first rejected tray; a written responsibility clause does not, priced at USD 54-384 for the 200-piece Private Label Carton run.
What a Report Proves and What It Does Not
Buyers in US wholesale tend to over-index on unit price for pT950 Platinum and under-index on what happens after delivery, with GRA report and private-label carton with hangtag stated on the same sheet.
We run this check per tray rather than per carton because the defect that matters on pT950 Platinum is the one that repeats. A single odd piece is noise; a pattern across one tray is a process problem and it will be in every tray made after it, which is how the Private Label Carton account reads it at USD 54-384.
The report the buyer receives states the count per tray, the measured average and the outlier count for pT950 Platinum. It is deliberately unglamorous, and it is the document that settles most disputes before they start, shipped as private-label carton with hangtag and certified GRA report.
How a Repeat Order Gets Built
The sequence below is fixed for a Private Label Carton run. The dates move with the stone lot, not with the shipping season, and 200 pieces leaves Wuzhou in private-label carton with hangtag at USD 54-384.
- Agree the stamp position, the hangtag copy and the box print before the first carton.
- Print the cartons and hangtags in one run: a sticker on a matte box reads as a repack.
- Set the barcode and the FNSKU mapping for every SKU before the label file is approved.
- Build the first carton at the quoted quantity so the pack-out is proven, not assumed.
- Hold a retained carton as the pack reference for every reorder.
Reorders inside this sequence run 12-15 days, because the model and the gauge set stay here after the Private Label Carton shipment, and the Private Label Carton quote for it sits at USD 54-384.
What This Means for a First Order
A first Private Label Carton order of 50 pieces per design at USD 54-384 is a test of the line, not a commitment to the range.
Ask for the retained tray and the batch report with the first shipment. Both are free and both decide the second order, and at USD 54-384 for 200 pieces that is the number the buyer signs.
Freight, Duty and the Arrival Check
Export runs through Guangzhou or Shenzhen. Air freight lands in 5-8 days on the US west coast and 7-10 on the east, quoted at USD 54-384 per piece in private-label carton with hangtag.
For a first order, DDP matters more than the freight rate. The surprise is the duty line, not the per-kilo charge, certified GRA report and packed private-label carton with hangtag at 200 pieces, and at USD 54-384 for 200 pieces that is the number the buyer signs.
Check the count, the weight and assay within 0.3K of the stamp and color match to the master chip before the carton goes to the shelf. Twenty minutes at receiving saves a season of returns, the figure being USD 54-384 for a 200-piece run.
Frequently Asked Questions
What is the minimum order for pT950 Platinum?
50 pieces per pT950 Platinum. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, priced at USD 54-384 for the 200-piece Private Label Carton run.
Do you supply certificates for pT950 Platinum?
GRA report on pT950 Platinum above the threshold stated on the quote. Below it we supply a batch report plus per-piece measurement of assay within 0.3K of the stamp, which is what a counter or a listing actually needs, certified GRA report and packed private-label carton with hangtag at 200 pieces.
How do you handle a rejected tray?
We replace or credit inside the same order cycle. The retained reference tray decides: if stamp accuracy shows on our retained piece we own it, and if it appeared in transit we split the assay cost and file with the carrier, priced at USD 54-384 for the 200-piece Private Label Carton run.
What are the payment terms?
30 percent deposit with the order, 70 percent against the bill of lading. For accounts on a second order we quote 30/70 with a 15-day balance window once the first shipment has cleared, which is USD 54-384 on the Private Label Carton schedule.
What is the minimum order for pT950 Platinum?
50 pieces per pT950 Platinum. Designs mix inside one shipment, so a first order of three designs at 50 pieces each is normal for a new US account. Below 50 the gauge check stops being independent of the shift, priced at USD 54-384 for the 200-piece Private Label Carton run.
Next Step
The next step is a sample in 3-5 days, not a container. Write to service@holycome.com or WhatsApp +86 18078079070 and mark it Private Label Carton, on a 200-piece Private Label Carton order at USD 54-384.
HOLYCOME is operated by Wuzhou HengliLai Jewelry Co., Ltd., a factory in Wuzhou, Guangxi, producing since 2009 at roughly 60,000 pieces a month. Contact service@holycome.com or WhatsApp +86 18078079070, with GRA report and private-label carton with hangtag stated on the same sheet.
Related reading: Custom Wedding Sets Vermeil Upgrade: Carton Cube, Duty and the Freight Line That Surp - HOLYCOME Custom Wedding Sets Valentine Program: MOQ, Mixed Designs and the Real First Order - HOLYCOME




