Synthetic Stones · November 17, 2026 · 0 views

Repair and Refinish Path for Synthetic Stones: What Can Be Fixed - HOLYCOME

Repair and Refinish Path for Synthetic Stones: What Can Be Fixed - HOLYCOME

Most buyers open a synthetic stones category on a price filter and close it on a spec they cannot verify.

Repair and Refinish Path for Synthetic Stones: What Can Be Fixed - HOLYCOME
Repair and Refinish Path for Synthetic Stones: What Can Be Fixed - HOLYCOME

The repair path is decided at purchase

Whether a Synthetic Stones design can be repaired depends on the setting type and the metal, both of which are fixed before the first sale. The range holds 88 designs in this category.

Buyers who ask about the repair path before ordering tend to have fewer returns than buyers who ask after.

The figure of 88 is worth reconciling against your own shortlist before the quote, because it sets how much of the buy can be stock.

88 designs means the shortlist can be assembled from stock patterns rather than from development requests.

What is repairable, by build

BuildTypical repairLimit
Prong settingRe-tip or replace a stoneRepeated work thins the prongs
Bezel settingRefinish onlyStone replacement needs a rebuild
Plated baseReplate once or twiceEach cycle removes base material
Solid goldResize, re-tip, repolishCost scales with metal weight

Why plating limits the repair path

A plated piece can be refinished, but every cycle takes a little of the base with it. After two cycles the surface starts to show the difference, which is why the wear window has to be explained at the point of sale.

Setting type and stone security

A bezel protects a stone better than prongs and is harder to repair. A prong setting is easy to re-tip and easier to damage. Neither is better in the abstract; the choice depends on how the piece will be worn.

  • Ask which setting the range uses before committing
  • Confirm whether the stone can be replaced without a rebuild
  • Check that the repair cost is quoted per operation, not per hour

Writing the care line that prevents disputes

The care instruction should match the build, not the aspiration. A plated design needs a different line from a solid gold one, and the listing is where that line belongs.

Range snapshot: Synthetic Stones by the numbers

DimensionReadingBuying note
Designs on file88Shortlist can come from stock patterns

Read the snapshot before the shortlist: a category that is narrow in metal but deep in cut behaves differently from one that is the other way round.

Frequently Asked Questions

Can a plated ring be replated?

Usually yes, once or twice, depending on the base. Each cycle removes a little material, so the finish is not indefinitely renewable.

Is a bezel setting harder to repair?

Stone replacement usually requires a rebuild. Refinishing is straightforward. That trade-off should be part of the buying decision.

Should I offer repairs as a service?

Only if you can quote them per operation and have a bench that can do the work. Otherwise the promise becomes a liability.

What causes the most repair requests?

Loose stones in prong settings and plating wear at the shank. Both are predictable from the build.

Does repair cost affect the retail price?

It affects the total cost of ownership, which is why the care line and the setting choice belong in the same conversation.

If you want to work from the current range rather than from a catalogue PDF, send the two price slots you sell and the size bands you stock. We will reply with the designs that fit, the build on each, and the reorder path. HOLYCOME keeps the full range in one place.

The checklist below is the short version of everything above, and it is worth running before the quote rather than after the order.

  • Confirm the design is a stock pattern and not a new build
  • Match the base metal and finish against the spec sheet
  • Check the stone origin wording before it goes on a listing
  • Quote every design at the same MOQ tier before comparing
  • Ask which design in the same price slot absorbs a stock-out

Need a quote for your next order?

Get Wholesale Pricing

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .