Every Holycome piece begins as a digital design. Follow the journey from concept to your customer's hand.
Manufacturing Steps
| Step | Process | Time | Technology |
|---|---|---|---|
| 1 | CAD 3D design | 1-3 days | Matrix, Rhino |
| 2 | 3D print wax model | 1 day | SLA printer |
| 3 | Investment casting | 1 day | Centrifugal casting |
| 4 | Casting cleanup | 1-2 days | Tumbling, filing |
| 5 | Stone setting | 1-3 days | Microscope, hand tools |
| 6 | Polishing | 1 day | Buffing wheels |
| 7 | QC + certification | 1 day | 10x inspection |
| 8 | Packaging + shipping | 1 day | Branded packaging |
Total Timeline
Stock designs: 3-5 days (pre-made inventory). Custom designs: 3-6 weeks from approval. Rush service available. Every step tracked in our system for transparency.
Technology + Craft
We use the best of both: CAD for precision design, 3D printing for accurate prototypes, but hand setting and finishing for quality. This hybrid approach ensures consistency and artistry.
Sizing and Wearability Data
Rings are the category where sizing mistakes cost the most. Collect a size curve from your own sales history and send it with the order; casting to that curve cuts resize requests and returns.
Comfort-fit inner bands are worth the small extra cost. They reduce friction on the finger, which lowers the most common complaint in wedding and engagement lines.
For wider bands above 6mm, tell the factory the intended finger and let them adjust the inner profile. A wide band cast on a standard profile feels half a size tight even when the measurement is correct.
Sourcing Benchmarks for This Category
Buyers usually benchmark three numbers before they shortlist a supplier: unit cost at a fixed volume, sample lead time, and the reject rate they can absorb without hurting sell-through. Get all three in writing, because a low unit price with a 12% reject rate is more expensive than a mid price with a 3% reject rate.
For stock designs HOLYCOME quotes from 50 pieces per design. Samples leave Wuzhou in 3 to 5 days. Bulk production runs 15 to 20 days under 500 pieces, and custom molds run 25 to 30 days. Payment is 30% T/T deposit with the balance against the bill of lading, and sample costs are credited back on the bulk order.
Ask for the cost breakdown line by line: metal weight, stone cost, labor, plating and packaging. Suppliers who will not break out metal weight are usually padding the labor line, and you cannot negotiate what you cannot see.
How the Production Line Actually Runs
The process starts with CAD. Your sketch, reference photo or existing sample is modelled to scale, and a 3D render comes back for approval. Nothing is cast until you sign off, which is where most quality problems are avoided.
From the approved model the factory cuts a wax or resin pattern, casts the piece, then sets stones by hand. Setting is the step that decides whether a ring looks like a $40 piece or a $400 piece: prongs must be even, seats must be flush and no stone should sit proud of the surface.
After setting, pieces go through polishing, plating and a final inspection under 10x magnification. Rejects are pulled at that station, not at packing, so a clean carton is a sign the QC step is real rather than a formality.
Quality Control You Should Specify
Write your acceptance criteria into the purchase order instead of relying on a verbal promise. The usual baseline is 3 to 5% dimensional or setting defects under 10x loupe, with defective units replaced free in the next shipment.
For plated goods, specify plating thickness and ask for a salt-spray result. One to two micron PVD over 316L holds colour for 12 to 18 months of daily wear; thin flash plating fails within weeks and comes back as refund requests.
For stone-set goods, add a stone-retention check: press each stone lightly and reject any that moves. A single lost stone costs more in goodwill than the whole piece costs to make.
Packing, Shipping and Paperwork
Packing protects margin. Each piece goes into an anti-tarnish bag with a sulfur absorber, then a labelled inner box, then a master carton with a packing list that matches your SKU codes. Mixed size and colour runs are packed and labelled separately so your receiving team does not have to re-sort.
Shipments leave through Guangzhou or Shenzhen. DDP is convenient for a first order because the landed cost is fixed; DAP is cheaper once you have your own customs broker. Either way, confirm the HS code and origin declaration before the carton seals.
Keep the commercial invoice, packing list and any certificate of origin in one folder per shipment. If your marketplace or a customs broker asks for documentation six months later, that folder is the difference between a routine answer and a delayed shipment.
Frequently Asked Questions
How long does a custom ring take?
3-6 weeks from design approval. Rush: 2 weeks for additional fee.
Can I see my design before production?
Yes — 3D renderings free, physical prototype $30-80 (deducted from order).
Conclusion
Holycome's manufacturing journey ensures quality at every step. Contact service@holycome.com to start a custom design.
Related Articles
For HS classification of jewellery in customs and export documentation, the WCO Harmonized System nomenclature is the authoritative nomenclature.
Authoritative References
For buyers who need to verify the technical and regulatory basis of this guide, the following independent institutions publish authoritative reference data:
- FTC Advertising FAQs - U.S. guidance on truthful marketing and disclosure.
- Wikipedia: E-commerce - online retail and marketplace background.
Related reading: OEM Moissanite Manufacturing: From CAD File to Finished Ring, CAD Jewelry Design Process, Moissanite Ring OEM Manufacturing Process.