Retail Operations · July 24, 2026 · 24 views

How to Handle Moissanite Jewelry Repairs at Your Store

How to Handle Moissanite Jewelry Repairs at Your Store

Why moissanite needs a repair rulebook

Moissanite rates 9.25 on the Mohs scale, which means it scratches almost nothing and almost nothing scratches it. That hardness is also the trap. A bench jeweler used to working on CZ or softer colored stones will solder, heat and torch the way they always have, and discover too late that moissanite has a narrower heat tolerance than diamond. Heat damage does not leave a crack; it leaves a cloudy, fractured interior that cannot be polished out. A clear repair rulebook prevents that outcome.

The repairs that are safe, every day

Most bench work on moissanite is routine:

  • Ring sizing up or down. Cut out and add a half size or two of stock, then re-solder. As long as the stone is protected from direct flame with a thermal shield, sizing is safe.
  • Prong retipping. When a prong wears thin, build it up with solder and roll the tip over the stone again. This is the single most common repair on engagement rings, and it should be on every six-month checkup list.
  • Stone tightening. A wobbly stone is an emergency fix before it is a lost stone. Seat it, burnish the prongs, and check the opposite prong for wear at the same time.
  • Rhodium replating. Sterling silver and white gold pieces dull and yellow over time. Re-plating is a chemical dip and an electroplate, no heat, and it restores the bright white look customers bought.
  • Polishing and ultrasonic cleaning. Moissanite takes polish well and survives a proper ultrasonic bath. This is the service that brings a ring in for a "look" and out as a sale.

The repairs that need care

Soldering near the stone is where damage happens. Always remove the moissanite from the setting before any repair that involves direct flame within a centimeter of the seat. Moissanite can handle moderate heat for short periods, but repeated torch passes while it is still set will crack the girdle. If your bench cannot remove the stone safely, send the piece back to a shop that can.

Never use a polishing compound or wheel that has previously been used on diamond. Diamond dust embedded in a buff will scratch moissanite, and once a moissanite is scratched it is a visible, unfixable line.

Warranty versus chargeable repairs

Write the line down. Warranty covers manufacturing defects: a stone that arrives loose, a prong that snaps at the tip within 90 days, a plating defect. Chargeable repairs cover everything customer-caused: a bent band from an impact, a stone dropped down a drain, resizing after the first size, replating after a year of wear. Customers accept chargeable repairs when the policy is written and explained at the point of sale; they dispute them when it surfaces as a surprise.

Setting turnaround expectations

The repair itself is rarely the problem; the wait is. A sizing that takes three days in the bench feels like a week to a customer who has a wedding on Saturday. Quote turnaround generously — say seven to ten business days for a sizing, three to five for a tightening — and then beat the quote. Overpromising and underdelivering is what turns a happy customer into a one-star review, even when the repair itself was perfect.

Write a repair ticket at the counter. Note the size, the service, the condition of the stone and prongs, and the customer's contact. Hand them a copy. When the piece is ready, call or text. That discipline costs minutes and eliminates the "you said Tuesday" conversation that every jewelry store has had.

When to send it back to the supplier

Some repairs you should not attempt in-house. A cracked stone, a chipped culet, or a setting that the manufacturer cast in a way you cannot replicate should go back to the wholesale supplier. Most suppliers accept warranty returns for defects within a defined window, and they often supply replacement stones at cost for repeat customers. Keep a record of every piece's certificate number — it is what activates the warranty.

Build a small repair shelf with a dedicated moissanite buff, a thermal shield, and a separate ultrasonic beaker. Cross-contamination with diamond dust is the quiet bench error that damages stones, and a labeled set of tools costs almost nothing. After a year, the repair shelf is the difference between a bench that turns around five pieces a week and one that turns around two. It also means you never have to tell a customer the most expensive sentence in retail: "we'll have to send this out." That single capability earns back the cost of the repair shelf within a season, in jobs you no longer outsource and in customers who no longer have to wait a week. For how this pairs with your after-sales process, see our retail operations guides.

The Wikipedia article on rhodium explains why rhodium plating is applied to white gold and silver jewellery.

Frequently Asked Questions

Is moissanite a good diamond alternative for retail buyers?

Yes for price-sensitive customers who want brilliance and hardness. Moissanite ranks 9.25 on the Mohs scale, holds up to daily wear and costs a fraction of a natural diamond of the same size, so it resells fast in bridal and fashion lines.

What is the minimum order for wholesale moissanite?

MOQ starts at 50 pieces per design for stock items. Custom cuts and private-label settings usually start at 100–300 pieces depending on the mold.

Do you provide certificates with moissanite stones?

Yes. Every parcel ships with GRA or IGI documentation listing carat weight, color grade and cut. We recommend passing the certificate to your end customer for trust.

How long does sample and bulk production take?

Samples ship in 3–5 days. Bulk runs take 15–20 days under 500 pieces, and 25–30 days for custom work.

Need a quote for your next order?

Get Wholesale Pricing

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .