Luxury Earrings · November 9, 2026 · 9 views

Luxury Earrings Made to Order: Sample to Container: The Real Calendar - HOLYCOME

Luxury Earrings Made to Order: Sample to Container: The Real Calendar - HOLYCOME

Sample to Container: The Real Calendar in the Made to Order Program

A US buyer of luxury Earrings came to us after 50 luxury Earrings from a trading company produced 11 rejects in the first inspection. The defect was not cosmetic: stamp accuracy had drifted far enough that the buyer's own bench could not correct it without recutting, the figure being USD 56-400 for a 50-piece run.

That rejection was avoidable at the drawing stage. Stamp accuracy belongs on the spec sheet next to the stone size, not in the claim email three weeks after arrival, which the Made to Order file records at USD 56-400 in single-piece foam box.

Luxury Earrings wholesale piece from the HOLYCOME line in Wuzhou

We kept the Made to Order price and changed the four measurements that matter. The rebuild cost about 21 seconds per piece and removed the whole claim conversation, priced at USD 56-400 for the 50-piece Made to Order run.

The Made-to-Order Path for luxury Earrings

Made-to-order is a different production line, not a slower version of stock. It starts with a signed drawing, then a wax or resin model, then a casting, then setting, then finish, and each stage can fail on its own, and at USD 56-400 for 50 pieces that is the number the buyer signs.

Twenty days is realistic for a new luxury Earring when the model exists and only the stone changes. A new model adds a day for the CAD, a day for the print, and a day for the buyer to approve the render before metal is committed, and 50 pieces leaves Wuzhou in single-piece foam box at USD 56-400.

The risk sits in approval, not in the bench. A buyer who approves a render on a phone screen and rejects the casting has bought a prototype, not a product. We send the render at 1:1 scale with a millimetre grid for that reason, on a 50-piece Made to Order order at USD 56-400.

Luxury Earrings setting and finish detail on a HOLYCOME factory sample

Three Failures That Reach the Made to Order Bench

alloy color drift

Two alloy lots of 14K rose can read peach and copper under the same light. Holding a master color chip per order keeps a collection coherent, and the Made to Order quote for it sits at USD 56-400.

In a 50-piece run this typically shows on 17 of pieces. Catching it means measuring assay within 0.3K of the stamp at the tray level, not inspecting the finished carton, the figure being USD 56-400 for a 50-piece run.

solder joint porosity

A sizing joint soldered with too much flux pits after polish and cracks in wear. Joint inspection belongs in the final QC, not the bench, the figure being USD 56-400 for a 50-piece run.

The commercial effect is refining loss plus a legal stamp correction, typically USD 15-28 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, which is how the Made to Order account reads it at USD 56-400.

stamp accuracy

A 14K stamp on 13.6K metal is a legal exposure, not a cosmetic one. Assay per lot is the only defensible check, and at USD 56-400 for 50 pieces that is the number the buyer signs.

Our countermeasure is a gauge and a written limit. It adds about 21 seconds per piece and removes the defect from the run rather than from the carton, and 50 pieces leaves Wuzhou in single-piece foam box at USD 56-400.

Four Spec Lines a Made to Order Buyer Checks

The Made to Order buyer signs on four numbers. The table puts the trade default beside our standard so the difference is visible before the deposit, and at USD 56-400 for 50 pieces that is the number the buyer signs.

Spec pointCommon trade outputHOLYCOME standardCost if missed
Clasp spring lifeSampled by handCycled 500 times on a jig per lotDetach claim and brand damage
Prong tension and seat depthChecked by feel at the benchPull-tested per piece, seat depth written on the sheetStone loss and total replacement
Hallmark depth and placementStamped where it fitsFixed position, depth measured so it never breaks the shankCustoms query and remaking
Solder flow at the jointNot inspectedJoint inspected under 10x before settingCrack at the seam in transit

None of the four adds cost at USD 56-400. They add about 21 seconds per piece and remove the reason to inspect twice.

Terms Behind a Made to Order Order

The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 50-piece Made to Order order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, with IGI report and single-piece foam box stated on the same sheet.

Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 56-400 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.

Packing follows the single-piece foam box format at 50 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, shipped as single-piece foam box and certified IGI report.

Certification is IGI report for the lots that carry it, with a batch report and per-piece measurement of assay within 0.3K of the stamp for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, and the Made to Order quote for it sits at USD 56-400.

A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, and 50 pieces leaves Wuzhou in single-piece foam box at USD 56-400.

Cost Split on a Made to Order Piece at USD 56-400

At USD 56-400 per piece for luxury Earrings, the stone sits near a quarter and the labor line moves by double digits between two quotes for one drawing.

Cost lineShareWhat moves it
Base metal or alloy for luxury Earrings32%Alloy choice and casting yield
Stone or melee for luxury Earrings23%Sieve range and lot batching
Setting and finishing labor for luxury Earrings21%Jig design and bench minutes
Plating, polish and QC for luxury Earrings14%Per-tray versus per-piece checks
Packaging for luxury Earrings10%single-piece foam box

The saving in the cheapest quote hides in plating and stone grade. At 50 pieces that saving is visible in season two, the figure being USD 56-400 for a 50-piece run.

Carton Cube, Duty and the Freight Line That Surprises Buyers

Most quotes for luxury Earrings describe the product and skip the part that decides whether the buyer makes money, which is USD 56-400 on the Made to Order schedule.

Three numbers decide it for luxury Earrings: the tolerance band, the inspection density and the responsibility clause. Write all three down and the rest of the negotiation is arithmetic. Leave any of them out and it becomes a discussion about intent, and the Made to Order quote for it sits at USD 56-400.

We send a one-page sheet with every luxury Earrings quote that states those three, plus the retained-tray rule. Buyers who compare on it usually find that the gap between suppliers is smaller than the gap between the specs they were comparing, on a 50-piece Made to Order order at USD 56-400.

Alloy, Karat and the Cost of a Color Change

This is the question that separates a trading company from a factory, and on luxury Earrings the answer is usually shorter than buyers expect, which is how the Made to Order account reads it at USD 56-400.

There is a version of this that looks cheaper on paper and costs more in practice: quoting the best case on luxury Earrings and letting the buyer discover the spread. It works once. The second order goes to whichever supplier quoted honestly, the figure being USD 56-400 for a 50-piece run.

We would rather lose a first order of luxury Earrings on price than explain a defect after it lands. That position is unusual in this category and it is the reason our reorder share is high, and the Made to Order quote for it sits at USD 56-400.

The First Made to Order Order

Start with three designs at 50 pieces each. That covers the 50 pieces you need to read sell-through without betting on one model, and 50 pieces leaves Wuzhou in single-piece foam box at USD 56-400.

Sample 3-5 days, bulk 15-20 days under 500 pieces, 50 pieces inside that window. The calendar is the same on every Made to Order run, which the Made to Order file records at USD 56-400 in single-piece foam box.

Getting single-piece foam box to the US market

Sea freight costs roughly a third of air and takes three times the transit, which only makes sense for an SKU already selling in the US market, with IGI report and single-piece foam box stated on the same sheet, on a 50-piece Made to Order order at USD 56-400.

FOB is the default and DDP is the option. Buyers new to the US market usually take DDP once and then switch after they see the breakdown, priced at USD 56-400 for the 50-piece Made to Order run.

At receiving, count cartons, weigh one tray and measure ten pieces against assay within 0.3K of the stamp. Twenty minutes here saves a season of returns, and the Made to Order quote for it sits at USD 56-400.

The Calendar Behind a Made to Order Run

Nothing in this sequence is clever. Each step exists because skipping it cost somebody a claim on luxury Earrings at USD 56-400.

  1. Sign the drawing at 1:1 scale with a millimetre grid, not a phone render.
  2. Cut the model in wax or resin and photograph it on the gauge before metal is committed.
  3. Cast the first article, set the stones and finish it exactly as bulk will be finished.
  4. Send the first article for approval with the weight and the stone measurements stated.
  5. Run the balance of the order in 25-30 days, holding the approved article as the reference.
  6. Ship with the approved article photographed beside a production piece from the same tray.

MOQ is 50 pieces per design, low enough to test a category and high enough to keep the casting line accountable, on a 50-piece Made to Order order at USD 56-400.

Frequently Asked Questions

Can you ship DDP?

DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, quoted at USD 56-400 per piece in single-piece foam box.

How long does a reorder of the same luxury Earring take?

With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, and the Made to Order quote for it sits at USD 56-400.

What finish do you use, and how thick is it?

Rhodium at 0.20 micron minimum on white luxury Earrings, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, quoted at USD 56-400 per piece in single-piece foam box.

How is luxury Earrings packed for single-piece foam box?

Every unit goes into a foam-backed pouch, then the single-piece foam box, then the outer carton at 50 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, and at USD 56-400 for 50 pieces that is the number the buyer signs.

Can you ship DDP?

DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, quoted at USD 56-400 per piece in single-piece foam box.

Next Step

If the USD 56-400 band fits the shelf, send a drawing and we quote the 50-piece Made to Order run inside one business day.

HOLYCOME runs this line from Wuzhou, Guangxi, through Wuzhou HengliLai Jewelry Co., Ltd. Output is about 60,000 pieces a month across luxury Earrings and adjacent categories. service@holycome.com or WhatsApp +86 18078079070, and the Made to Order quote for it sits at USD 56-400.

Related reading: Luxury Earrings Private Label Carton: AQL, Tray Checks and What a QC Report Should Sa - HOLYCOME Gold Bracelets Q4 Holiday Stock: What the Quote Actually Covers - HOLYCOME

Need a quote for your next order?

Get Wholesale Pricing

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .