Operations · August 3, 2026 · 39 views

A Moissanite Jewelry Quality Checklist for Receiving Wholesale Shipments

A Moissanite Jewelry Quality Checklist for Receiving Wholesale Shipments

Incoming QC is not a 15-minute routine. It is a per-piece inspection, and the difference between a happy customer and a return claim is whether you ran the checklist before the item hit the case. Here is the version we use on moissanite shipments, organized by what to look at first, so you can hand it to staff and know it will be run the same way every time.

Carton and paperwork, before opening trays

Before touching a single piece, confirm the carton matches the PO: number of SKUs, sizes, carat weights. Open with the packing list in hand. If anything on the carton does not match, stop. Photograph the outside, the seal, and the packing list immediately. This is the evidence trail if a claim becomes a dispute. Check that the tray labels on the inside match the packing list; mismatched labels are the first sign that the order was pulled from the wrong inventory.

Rings: the eight-point check

  1. Prong tightness: gently wiggle the stone with a wood stick. No movement.
  2. Prong finish: run a finger along each prong tip. No sharp catches.
  3. Stamps: inside shank reads 925, 925 S, or the gold mark you ordered.
  4. Comfort fit: roll the ring on a mandrel. No rough interior edges.
  5. Rhodium: under a lamp, even white coverage, no yellow showing through.
  6. Certificate: stone carat on the cert matches the caliper reading.
  7. Size: mandrel reading matches the tray label.
  8. Engraving: if ordered, spelling and position are correct.

Earrings: backings and posts

For stud earrings, check that posts are straight, butterfly backs click firmly, and the pair matches in size and color. Hold both earrings up side by side under the lamp; one slightly yellower stone in a pair is the defect customers notice first. For drops, gently open and close the hinge or jump ring three times; it should stay closed without tension. Asymmetry between the left and right earring is the most common defect and the one customers notice immediately, because they see both at once.

Necklaces and chains

Lay the chain flat. It should drape without kinks. Open and close the clasp ten times; a spring ring or lobster clasp should snap consistently. Pull gently on the jump rings where the clasp attaches. Thin chains at the clasp point are the first failure point in real wear. Check pendant bail size against the chain you intend to display it with; a bail that does not fit the chain on the hanger is a merchandising problem you will fix once, at receiving. Inspect the pendant mount the same way you inspect a ring: prongs tight, stones seated, finish even.

Paved and micro-set pieces

Run a fingernail lightly across every pavé row. A loose stone catches the nail. Look under a loupe for missing micro-prongs or stones sitting tilted. On halo settings, check that the halo stones are all level; one tilted halo stone is instantly visible to any customer comparing the ring side-on. Run the same check on pavé wedding bands, where micro-set stones work loose more often because the band is sized after setting.

Packaging and paperwork

Check that each piece arrives in its own pouch or box, with the certificate slotted behind the tray. If a piece arrives loose in the carton, photograph it before moving it. Keep all packaging for 30 days; you may need it for a return. Log every piece in a receiving sheet: date, SKU, size, carat, inspector initials, and any defect noted. That log is what lets you track defect rates over time and spot a supplier whose quality is drifting.

What to do with a defect once found

Pull the piece out of sellable stock immediately, tag it with the defect date and your inspector initials, and set it in a separate "claim" tray. Do not tuck it back into the case intending to remember. Most boutiques that lose money on defects do so because a defective piece went back on display and sold before the claim was filed. If the defect is minor and the piece is still sellable at a slight discount, decide deliberately: mark it down as a showroom piece, disclose the flaw, and keep the margin. But do not mix it with full-price inventory.

What is returnable vs acceptable

Not every imperfection is a claim. A tiny rhodium scratch on the underside of a shank is acceptable; a visible plating streak on the top face is not. A stone that wiggles under light pressure is returnable; a stone that is perfectly tight but slightly off-center in a generic mount is a judgment call. Document both categories in your receiving log so the supplier sees a consistent, fair standard from you. Over a year, that log also tells you which SKUs and which settings consistently underperform, so you stop reordering them. Use this list alongside our other receiving guides to standardize the routine.

Independent background on moissanite — how its hardness and refractive index compare with diamond — is documented in the Wikipedia article on moissanite.

Frequently Asked Questions

Is moissanite a good diamond alternative for retail buyers?

Yes for price-sensitive customers who want brilliance and hardness. Moissanite ranks 9.25 on the Mohs scale, holds up to daily wear and costs a fraction of a natural diamond of the same size, so it resells fast in bridal and fashion lines.

What is the minimum order for wholesale moissanite?

MOQ starts at 50 pieces per design for stock items. Custom cuts and private-label settings usually start at 100–300 pieces depending on the mold.

Do you provide certificates with moissanite stones?

Yes. Every parcel ships with GRA or IGI documentation listing carat weight, color grade and cut. We recommend passing the certificate to your end customer for trust.

How long does sample and bulk production take?

Samples ship in 3–5 days. Bulk runs take 15–20 days under 500 pieces, and 25–30 days for custom work.

Need a quote for your next order?

Get Wholesale Pricing

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .