Sample to Container: The Real Calendar in the Made to Order Program
A US buyer of pT950 Platinum sent us a competitor's pT950 Platinum in March with one question: why does this fail at stamp accuracy after a season. We measured it, rebuilt the spec around assay within 0.3K of the stamp and color match to the master chip, and shipped 50 pT950 Platinum that cleared inspection with zero rejects, which is how the Made to Order account reads it at USD 56-400.
At 50 pieces the buyer was not buying a defect, they were buying a document. The Made to Order order carried a photo and a price, and stamp accuracy had nowhere to live, with IGI report and single-piece foam box stated on the same sheet.
Our rebuild kept the buyer's retail price and changed four numbers on the bench. The next run cleared inspection because the specification traveled with the tray, not with a phone call, priced at USD 56-400 for the 50-piece Made to Order run.
The Made-to-Order Path for pT950 Platinum
Made-to-order is a different production line, not a slower version of stock. It starts with a signed drawing, then a wax or resin model, then a casting, then setting, then finish, and each stage can fail on its own, which the Made to Order file records at USD 56-400 in single-piece foam box.
Twenty days is realistic for a new pT950 Platinum when the model exists and only the stone changes. A new model adds a day for the CAD, a day for the print, and a day for the buyer to approve the render before metal is committed, and the Made to Order quote for it sits at USD 56-400.
The risk sits in approval, not in the bench. A buyer who approves a render on a phone screen and rejects the casting has bought a prototype, not a product. We send the render at 1:1 scale with a millimetre grid for that reason, certified IGI report and packed single-piece foam box at 50 pieces.
Three Failures That Reach the Made to Order Bench
alloy color drift
Two alloy lots of 14K rose can read peach and copper under the same light. Holding a master color chip per order keeps a collection coherent, and at USD 56-400 for 50 pieces that is the number the buyer signs.
In a 50-piece run this typically shows on 8 of pieces. Catching it means measuring assay within 0.3K of the stamp at the tray level, not inspecting the finished carton, which is USD 56-400 on the Made to Order schedule.
solder joint porosity
A sizing joint soldered with too much flux pits after polish and cracks in wear. Joint inspection belongs in the final QC, not the bench, and 50 pieces leaves Wuzhou in single-piece foam box at USD 56-400.
The commercial effect is refining loss plus a legal stamp correction, typically USD 15-28 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, on a 50-piece Made to Order order at USD 56-400.
stamp accuracy
A 14K stamp on 13.6K metal is a legal exposure, not a cosmetic one. Assay per lot is the only defensible check, which the Made to Order file records at USD 56-400 in single-piece foam box.
Our countermeasure is a gauge and a written limit. It adds about 21 seconds per piece and removes the defect from the run rather than from the carton, which is USD 56-400 on the Made to Order schedule.
Four Spec Lines a Made to Order Buyer Checks
Most quotes describe the pT950 Platinum and skip the part that determines the buyer's margin. Those four lines are listed below with the trade default beside our standard, and the Made to Order quote for it sits at USD 56-400.
| Spec point | Common trade output | HOLYCOME standard | Cost if missed |
|---|---|---|---|
| Clasp spring life | Sampled by hand | Cycled 500 times on a jig per lot | Detach claim and brand damage |
| Prong tension and seat depth | Checked by feel at the bench | Pull-tested per piece, seat depth written on the sheet | Stone loss and total replacement |
| Hallmark depth and placement | Stamped where it fits | Fixed position, depth measured so it never breaks the shank | Customs query and remaking |
| Solder flow at the joint | Not inspected | Joint inspected under 10x before setting | Crack at the seam in transit |
Write these four into the purchase order and the argument after delivery becomes arithmetic rather than recollection, and 50 pieces leaves Wuzhou in single-piece foam box at USD 56-400.
Terms Behind a Made to Order Order
The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 50-piece Made to Order order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, the figure being USD 56-400 for a 50-piece run.
Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 56-400 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.
Packing follows the single-piece foam box format at 50 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, which is how the Made to Order account reads it at USD 56-400.
Certification is IGI report for the lots that carry it, with a batch report and per-piece measurement of assay within 0.3K of the stamp for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, and at USD 56-400 for 50 pieces that is the number the buyer signs.
A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, which is USD 56-400 on the Made to Order schedule.
Cost Split on a Made to Order Piece at USD 56-400
At USD 56-400 per piece for pT950 Platinum, the stone is roughly a quarter and labor is where two quotes for the same drawing diverge.
| Cost line | Share | What moves it |
|---|---|---|
| Base metal or alloy for pT950 Platinum | 32% | Alloy choice and casting yield |
| Stone or melee for pT950 Platinum | 23% | Sieve range and lot batching |
| Setting and finishing labor for pT950 Platinum | 21% | Jig design and bench minutes |
| Plating, polish and QC for pT950 Platinum | 14% | Per-tray versus per-piece checks |
| Packaging for pT950 Platinum | 10% | single-piece foam box |
The saving in the cheapest pT950 Platinum quote hides in the plating line and the stone grade. Both appear in season two, not on arrival, which the Made to Order file records at USD 56-400 in single-piece foam box.
Carton Cube, Duty and the Freight Line That Surprises Buyers
This is the question that separates a trading company from a factory, and on pT950 Platinum the answer is usually shorter than buyers expect, quoted at USD 56-400 per piece in single-piece foam box.
Three numbers decide it for pT950 Platinum: the tolerance band, the inspection density and the responsibility clause. Write all three down and the rest of the negotiation is arithmetic. Leave any of them out and it becomes a discussion about intent, with IGI report and single-piece foam box stated on the same sheet.
We send a one-page sheet with every pT950 Platinum quote that states those three, plus the retained-tray rule. Buyers who compare on it usually find that the gap between suppliers is smaller than the gap between the specs they were comparing, and the Made to Order quote for it sits at USD 56-400.
Alloy, Karat and the Cost of a Color Change
Buyers ask it in the first call about pT950 Platinum and rarely get a number they can put in a spreadsheet, with IGI report and single-piece foam box stated on the same sheet.
There is a version of this that looks cheaper on paper and costs more in practice: quoting the best case on pT950 Platinum and letting the buyer discover the spread. It works once. The second order goes to whichever supplier quoted honestly, certified IGI report and packed single-piece foam box at 50 pieces.
We would rather lose a first order of pT950 Platinum on price than explain a defect after it lands. That position is unusual in this category and it is the reason our reorder share is high, certified IGI report and packed single-piece foam box at 50 pieces.
The First Made to Order Order
The point of a small first run is not the margin. It is finding out whether the supplier's paperwork survives contact with the actual goods, which is USD 56-400 on the Made to Order schedule.
The first order is the cheapest inspection a buyer will ever run, because the volume is small enough to check every tray by hand, on a 50-piece Made to Order order at USD 56-400.
Getting single-piece foam box to North American retail
Export runs through Guangzhou or Shenzhen. For Made to Order orders the IGI report file travels with the shipping documents, not separately, which the Made to Order file records at USD 56-400 in single-piece foam box.
The clearance term matters more than the rate at 50 pieces. A duty surprise can cost more than the whole freight line, which is USD 56-400 on the Made to Order schedule.
The arrival check is three steps: count cartons against the packing list, weigh a sample tray, and measure ten pieces against assay within 0.3K of the stamp and color match to the master chip, and at USD 56-400 for 50 pieces that is the number the buyer signs.
The Calendar Behind a Made to Order Run
For single-piece foam box at 50 pieces, the sequence is fixed and the dates are the only thing that moves, and at USD 56-400 for 50 pieces that is the number the buyer signs.
- Sign the drawing at 1:1 scale with a millimetre grid, not a phone render.
- Cut the model in wax or resin and photograph it on the gauge before metal is committed.
- Cast the first article, set the stones and finish it exactly as bulk will be finished.
- Send the first article for approval with the weight and the stone measurements stated.
- Run the balance of the order in 25-30 days, holding the approved article as the reference.
- Ship with the approved article photographed beside a production piece from the same tray.
MOQ stays at 50 pieces per design on pT950 Platinum, low enough to test a shelf and high enough to keep the gauge check independent, certified IGI report and packed single-piece foam box at 50 pieces, and 50 pieces leaves Wuzhou in single-piece foam box at USD 56-400.
Frequently Asked Questions
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, priced at USD 56-400 for the 50-piece Made to Order run.
How long does a reorder of the same pT950 Platinum take?
With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, and at USD 56-400 for 50 pieces that is the number the buyer signs.
What finish do you use, and how thick is it?
Rhodium at 0.20 micron minimum on white pT950 Platinum, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, the figure being USD 56-400 for a 50-piece run.
How is pT950 Platinum packed for single-piece foam box?
Every unit goes into a foam-backed pouch, then the single-piece foam box, then the outer carton at 50 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, which the Made to Order file records at USD 56-400 in single-piece foam box.
Can you ship DDP?
DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, priced at USD 56-400 for the 50-piece Made to Order run.
Next Step
If the USD 56-400 band fits your shelf, send the drawing and we will quote the 50-piece Made to Order run inside one business day.
HOLYCOME runs this line from Wuzhou, Guangxi, through Wuzhou HengliLai Jewelry Co., Ltd. Output is about 60,000 pieces a month across pT950 Platinum and adjacent categories. service@holycome.com or WhatsApp +86 18078079070, quoted at USD 56-400 per piece in single-piece foam box.
Related reading: PT950 Platinum Private Label Carton: AQL, Tray Checks and What a QC Report Should Say - HOLYCOME Custom Wedding Sets Q4 Holiday Stock: What the Quote Actually Covers - HOLYCOME




