PT950 Platinum · November 9, 2026 · 9 views

PT950 Platinum Vermeil Upgrade: Carton Cube, Duty and the Freight Line That Surprises - HOLYCOME

PT950 Platinum Vermeil Upgrade: Carton Cube, Duty and the Freight Line That Surprises - HOLYCOME

Vermeil and Gold Plating Specs for pT950 Platinum

Vermeil means a gold layer of at least 2.5 microns over sterling silver, and the US market reads that number as a material claim rather than a finish note. Below 2.5 microns the piece is gold-plated, not vermeil, and the word cannot be used, the figure being USD 72-512 for a 100-piece run.

We run 3 microns on pT950 Platinum for accounts that publish the claim, with a palladium strike layer so wear-through reads white and not yellow. Thickness is logged per lot and appears on the GRA report batch sheet, with GRA report and retail box with care card stated on the same sheet.

PT950 Platinum wholesale piece from the HOLYCOME line in Wuzhou

The cost difference is real: the USD 72-512 band moves up roughly sixty percent against rhodium-finished silver, and the retail price has to carry that or the margin disappears in the second season when the plating shows wear.

Carton Cube, Duty and the Freight Line That Surprises Buyers in the Vermeil Upgrade Program

A US buyer of pT950 Platinum sent us a competitor's pT950 Platinum in November with one question: why does this fail at stamp accuracy after a season. We measured it, rebuilt the spec around assay within 0.3K of the stamp and color match to the master chip, and shipped 100 pT950 Platinum that cleared inspection with zero rejects, shipped as retail box with care card and certified GRA report.

The bench did not miss the defect, it was never asked to look for it. Stamp accuracy was absent from the purchase order, and a defect that is not named cannot be rejected on arrival, and at USD 72-512 for 100 pieces that is the number the buyer signs.

The rebuild held the USD 72-512 quote and changed the plating log, the gauge and the tray rule. Second run shipped retail box with care card with zero rejects.

PT950 Platinum setting and finish detail on a HOLYCOME factory sample

Three Failures That Reach the Vermeil Upgrade Bench

stamp accuracy

A 14K stamp on 13.6K metal is a legal exposure, not a cosmetic one. Assay per lot is the only defensible check, and the Vermeil Upgrade quote for it sits at USD 72-512.

The commercial effect is refining loss plus a legal stamp correction, typically USD 15-28 per piece. Buyers who have seen it once put it in the purchase order; buyers who have not usually discover it on the first return, shipped as retail box with care card and certified GRA report.

alloy color drift

Two alloy lots of 14K rose can read peach and copper under the same light. Holding a master color chip per order keeps a collection coherent, certified GRA report and packed retail box with care card at 100 pieces.

Our countermeasure is a gauge and a written limit. It adds about 21 seconds per piece and removes the defect from the run rather than from the carton, the figure being USD 72-512 for a 100-piece run.

solder joint porosity

A sizing joint soldered with too much flux pits after polish and cracks in wear. Joint inspection belongs in the final QC, not the bench, with GRA report and retail box with care card stated on the same sheet.

In a 100-piece run this typically shows on 14 of pieces. Catching it means measuring assay within 0.3K of the stamp at the tray level, not inspecting the finished carton, the figure being USD 72-512 for a 100-piece run.

Cost Split on a Vermeil Upgrade Piece at USD 72-512

Buyers assume the stone dominates the cost of a pT950 Platinum. At wholesale it is closer to a quarter, and the labor line is where two quotes for the same drawing diverge by double digits, priced at USD 72-512 for the 100-piece Vermeil Upgrade run.

Cost lineShareWhat moves it
Base metal or alloy for pT950 Platinum32%Alloy choice and casting yield
Stone or melee for pT950 Platinum23%Sieve range and lot batching
Setting and finishing labor for pT950 Platinum21%Jig design and bench minutes
Plating, polish and QC for pT950 Platinum14%Per-tray versus per-piece checks
Packaging for pT950 Platinum10%retail box with care card

The cheapest quote for pT950 Platinum usually hides its saving in the plating line and the stone grade. Both show up in the second season, not the first, and the Vermeil Upgrade quote for it sits at USD 72-512.

Four Spec Lines a Vermeil Upgrade Buyer Checks

A Vermeil Upgrade quote that states only metal and stone size leaves stamp accuracy undefined, and undefined is what gets rejected on arrival, which the Vermeil Upgrade file records at USD 72-512 in retail box with care card.

Spec pointCommon trade outputHOLYCOME standardCost if missed
Plating thicknessNominal only0.20 micron rhodium logged per lot, 3 microns on vermeilWear-through inside one season
Surface porosity after polishSeen after platingCast porosity checked before plating, rejects pulled at that stagePlating blister six weeks later
Stone colour consistencyGraded by eye under D65Colour matched to a retained master stone, per trayRepeat colour complaint in the same SKU
Sizing drift across the runNot measuredGo/no-go gauge on every size, drift held under 0.15 mmResize queue and reship cost

Nothing here adds cost at USD 72-512. It adds documentation, and documentation is what the retail box with care card carton is missing.

Terms Behind a Vermeil Upgrade Order

The commercial frame is short enough to state in full. Minimum order is 50 pieces per design, and mixed designs travel in one shipment, so a 100-piece Vermeil Upgrade order can carry three or four models without a separate setup charge. Sample pieces leave in 3-5 days when the components are in stock, and a new model adds about twenty days before the first article exists, which is how the Vermeil Upgrade account reads it at USD 72-512.

Payment is 30 percent with the order and 70 percent against the bill of lading, with the balance window stated on the invoice rather than agreed by message. Prices quoted at USD 72-512 are FOB Guangzhou or Shenzhen; DDP is quoted separately because the duty line moves with the tariff schedule and not with our cost.

Packing follows the retail box with care card format at 100 pieces to the carton, and the packing list carries SKU, size and stone size so receiving can count without opening every box. Private-label cartons add three days for the print run and must be approved before the first bulk order, not after it, which is how the Vermeil Upgrade account reads it at USD 72-512.

Certification is GRA report for the lots that carry it, with a batch report and per-piece measurement of assay within 0.3K of the stamp for the lots below the threshold. The document set travels with the shipping papers, which is what a customs broker asks for at the port rather than after clearance, and 100 pieces leaves Wuzhou in retail box with care card at USD 72-512.

A rejected tray is settled inside the same order cycle against the retained reference piece. If the difference sits on our retained sample we replace or credit; if it appeared in transit we split the assay cost and file with the carrier, and that rule is written on the order before the deposit clears, the figure being USD 72-512 for a 100-piece run.

What a Report Proves and What It Does Not

Nobody quotes it for pT950 Platinum until something goes wrong, which is exactly why it belongs in the first email, and at USD 72-512 for 100 pieces that is the number the buyer signs.

We run this check per tray rather than per carton because the defect that matters on pT950 Platinum is the one that repeats. A single odd piece is noise; a pattern across one tray is a process problem and it will be in every tray made after it, and 100 pieces leaves Wuzhou in retail box with care card at USD 72-512.

The report the buyer receives states the count per tray, the measured average and the outlier count for pT950 Platinum. It is deliberately unglamorous, and it is the document that settles most disputes before they start, the figure being USD 72-512 for a 100-piece run.

The Sample Approval That Survives Production

It is not a marketing point on pT950 Platinum. It is the number that decides whether the second order happens, priced at USD 72-512 for the 100-piece Vermeil Upgrade run.

The buyers who get the most out of pT950 Platinum treat the first order as a measurement, not as a purchase. They buy a small run, measure the four numbers that matter, and then commit, with GRA report and retail box with care card stated on the same sheet.

We support it directly on pT950 Platinum: a 50-piece test run per design, the same gauge standard as a bulk order, and the same retained tray. Small does not have to mean loose, shipped as retail box with care card and certified GRA report.

Getting retail box with care card to the US market

For a Vermeil Upgrade order at 100 pieces the carton count decides the freight more than the weight does. retail box with care card packs tighter than a display tray, on a 100-piece Vermeil Upgrade order at USD 72-512.

The freight rate matters less than the clearance terms at USD 72-512 per piece. A duty surprise can cost more than the entire freight line.

At receiving, count cartons, weigh one tray of retail box with care card and measure ten pieces against assay within 0.3K of the stamp. Twenty minutes here saves a season, and at USD 72-512 for 100 pieces that is the number the buyer signs.

The Calendar Behind a Vermeil Upgrade Run

The calendar below is what we quote on a 100-piece run of pT950 Platinum. It starts when the spec is signed, not when the deposit clears, which is USD 72-512 on the Vermeil Upgrade schedule.

  1. Sign the drawing at 1:1 scale with a millimetre grid, not a phone render.
  2. Cut the model in wax or resin and photograph it on the gauge before metal is committed.
  3. Cast the first article, set the stones and finish it exactly as bulk will be finished.
  4. Send the first article for approval with the weight and the stone measurements stated.
  5. Run the balance of the order in 25-30 days, holding the approved article as the reference.
  6. Ship with the approved article photographed beside a production piece from the same tray.

MOQ stays at 50 pieces per design on the Vermeil Upgrade program, low enough to test a category and high enough to keep the casting line accountable, and at USD 72-512 for 100 pieces that is the number the buyer signs.

The First Vermeil Upgrade Order

The first order should be small enough to inspect completely and large enough to keep the gauge check independent of the shift, the figure being USD 72-512 for a 100-piece run.

Sample in 3-5 days, bulk in 15-20 days under 500 pieces. At 100 pieces the calendar is the same on every Vermeil Upgrade run, which is USD 72-512 on the Vermeil Upgrade schedule.

Frequently Asked Questions

How long does a reorder of the same pT950 Platinum take?

With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, certified GRA report and packed retail box with care card at 100 pieces.

What finish do you use, and how thick is it?

Rhodium at 0.20 micron minimum on white pT950 Platinum, with a palladium strike layer so wear-through reads white rather than yellow. Vermeil runs at 3 microns over sterling and is logged per lot, which the Vermeil Upgrade file records at USD 72-512 in retail box with care card.

How is pT950 Platinum packed for retail box with care card?

Every unit goes into a foam-backed pouch, then the retail box with care card, then the outer carton at 100 pieces. The packing list carries the SKU, the size and the stone size so receiving can check without opening every box, quoted at USD 72-512 per piece in retail box with care card.

Can you ship DDP?

DDP is available for US accounts and removes the duty invoice that arrives after the carton clears. FOB Guangzhou or Shenzhen is the default, and most buyers take DDP once and then switch after they see the breakdown, which is USD 72-512 on the Vermeil Upgrade schedule.

How long does a reorder of the same pT950 Platinum take?

With the model, the gauge set and the signed spec already in our system, a repeat is 12-15 days; a first run is 3-5 days for a stock-component sample and about 20 days when a new model is needed, certified GRA report and packed retail box with care card at 100 pieces.

Next Step

Send one drawing or one competitor sample with your target landed cost. We answer with a tolerance sheet, a cost breakdown and a production calendar in two business days, and at USD 72-512 for 100 pieces that is the number the buyer signs.

HOLYCOME runs this line from Wuzhou, Guangxi, through Wuzhou HengliLai Jewelry Co., Ltd. Output is about 60,000 pieces a month across pT950 Platinum and adjacent categories. service@holycome.com or WhatsApp +86 18078079070, and 100 pieces leaves Wuzhou in retail box with care card at USD 72-512.

Related reading: PT950 Platinum Amazon FBA Ready: Alloy, Karat and the Cost of a Color Change - HOLYCOME PT950 Platinum Made to Order: Sample to Container: The Real Calendar - HOLYCOME

Need a quote for your next order?

Get Wholesale Pricing

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .