Buying Guides · October 3, 2026 · 32 views

Buying Loose Moissanite Online: A 9-Point Inspection Checklist

Buying Loose Moissanite Online: A 9-Point Inspection Checklist

A reseller in Manchester placed a 30-stone order online last spring, paid the balance against a factory video, and received a parcel where half the ovals had visible bow-ties the video had hidden. By the time the dispute settled, he had already promised the stones to two retail customers. Buying loose moissanite online is normal - most of the trade moves this way - but "we'll send a video" is not an inspection. The checklist below is the one we hand new resellers before their first bulk parcel.

Point 1: The photo is on your light, not theirs

Factory photos are lit to flatter. A stone shot against a black velvet tray with a ring light will show maximum fire and zero inclusions. Before you pay, ask for one short video: the stone held between tweezers, rotated under a plain 60W household bulb, no ring light. That is the light your customer will see it under on a white setting. If the stone looks hazy or gray under plain bulb light, it will look that way on your listing too. This is the same principle behind shooting moissanite without flare - flat, neutral light tells the truth.

Point 2 through 4: Measure, weigh, tilt

Request the exact mm dimensions, not just the carat equivalent. A 6.5mm round should measure 6.48-6.52mm; an oval sold as 8x6 should measure within 0.1mm. Stones that run 6.3mm when labeled 6.5mm will sit small in a setting made for 6.5. Ask for the actual carat weight of the loose stone - moissanite is lighter than diamond, so a 1-carat equivalent round weighs about 0.88ct, and a supplier that misstates weight is usually misstating size too. Then ask for a tilt shot: the stone on its side, viewed through the pavilion, to spot a culet chip or a girdle nick that a face-up photo hides. The FTC Jewelry Guides require carat disclosure to be accurate, so mismatched mm is also a compliance issue on your listing.

Points 5 through 7: Cert, origin and setting compatibility

Check that the certificate number, stone size and shape on the paper match the stone in the photo. A GRA or SGS report that lists a generic "moissanite" without the mm range is a form sheet, not a stone-specific report. Ask whether the stone is cut to fit standard prong seats - a stone with an off-standard girdle thickness will not sit flush in a stock head. Confirm whether the factory will provide a custom setting in the same run, or whether you are sourcing a stone that your bench jeweler may struggle to seat. Moissanite is Mohs 9.25, but that does not make it indestructible; a stone with a thin, faceted girdle chips more easily than one with a thick, polished girdle.

Points 8 and 9: Refund terms and sample-first policy

Before the bulk order, place a 1-to-3-stone sample order at retail price. That sample is your reference. Confirm in writing what happens if the bulk parcel does not match the sample: who pays return freight, what the replacement window is, and whether there is a rejection clause on color or cut. Suppliers that refuse sample-first are usually the ones whose bulk batches drift. This is exactly why resellers use a sample-order workflow before committing to a 50-piece SKU. If a supplier pushes you to skip the sample and "just trust the video," that answer is itself the data point.

A practical note on parcel mix: do not test all nine points on every stone. Test points 1 through 4 on three random stones from the parcel, and points 5 through 7 on the certificate set. If the three check stones pass, the batch is consistent. If one fails, pull a fourth and a fifth; two failures means reject the parcel. This sampling method keeps inspection fast on a 50-piece order while still catching a shifted batch before you list it. Store the rejected stones separately until the supplier agrees on replacement or refund, and never list a stone you have not measured yourself.

Can I buy loose moissanite from a photo only?

No. Always ask for a plain-bulb video and exact mm measurements before paying the balance. Photos alone hide bow-ties, haze and size drift.

What mm tolerance is acceptable?

Within 0.1mm of the labeled size. Anything more means the stone may not fit a standard head made to that size.

Does a GRA card come with every loose stone?

Most suppliers include one on stones above a certain size, but check that the card names the exact mm and shape, not just "moissanite."

Should I order a sample before a bulk buy?

Yes. A 1-to-3-piece sample costs little and becomes your reference for rejecting or approving the full parcel later.

HOLYCOME ships sample sets at cost, with a plain-bulb video and mm caliper shot, before any bulk commitment. Check the loose-stone price tiers, order your reference sample, then scale the SKU once you have held the stone.

US federal rules for describing metals and gemstones in jewellery advertising are set out in the FTC Guides for the Jewelry, Precious Metals and Pewter Industries (16 CFR Part 23).

Frequently Asked Questions

Is moissanite a good diamond alternative for retail buyers?

Yes for price-sensitive customers who want brilliance and hardness. Moissanite ranks 9.25 on the Mohs scale, holds up to daily wear and costs a fraction of a natural diamond of the same size, so it resells fast in bridal and fashion lines.

What is the minimum order for wholesale moissanite?

MOQ starts at 50 pieces per design for stock items. Custom cuts and private-label settings usually start at 100–300 pieces depending on the mold.

Do you provide certificates with moissanite stones?

Yes. Every parcel ships with GRA or IGI documentation listing carat weight, color grade and cut. We recommend passing the certificate to your end customer for trust.

How long does sample and bulk production take?

Samples ship in 3–5 days. Bulk runs take 15–20 days under 500 pieces, and 25–30 days for custom work.

Need a quote for your next order?

Get Wholesale Pricing

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .