A reseller in Amsterdam offered "free resizing" on his moissanite solitaire listings. His bench jeweler heated the shank to open it from a size 6 to an 8, and the pavilion of the moissanite developed a surface crack visible under loupe. The ring went back to the customer as "fine" and returned two weeks later with the stone split. Resizing a moissanite ring is not the same operation as resizing a diamond ring, and the questions you ask your supplier up front decide whether you offer the service at all.
Why moissanite resizing is different
Diamond is thermally stable - a jeweler can heat-shank it with the stone in or out and the diamond shrugs it off. Moissanite is more heat-sensitive. It can crack or develop internal stress fractures if the stone is heated unevenly, and it expands at a different rate than the metal around it. The safe bench practice is to remove the stone, resize the shank, and re-seat the stone - not to heat the ring with the stone set in. Moissanite's thermal properties are why experienced jewelers treat it like a colored stone on the bench rather than like diamond. If your supplier has only ever resized diamond rings, they may not know this.
Question 1: Can you resize with the stone set, or do you remove it?
The correct answer is "we remove the stone." A supplier that says "we heat it directly" is a supplier you should not be sending resizing work to. Removing the stone, resizing the plain band, and re-seating with fresh prongs is the standard. Ask what they do with the stone while the band is on the mandrel - it should be in a protected tray, not on the bench next to the torch.
Question 2: What size range can you safely adjust?
Most solitaire bands can be adjusted up or down by two sizes without weakening the shank. Beyond three sizes up, the band stretches thin and the shoulder work required changes the ring's proportions. A supplier that promises any size on any ring is quoting loosely. For a best-selling size mix, stock 6, 7 and 8 US deep so resizing requests stay within the safe two-size window.
Questions 3 and 4: Heat method and re-tip policy
Ask whether they use a torch or a steam/ultrasonic-assisted process. Torch work on the shank is normal as long as the stone is out. Ask what they do to the prongs after re-seating: every resize should include a re-tip check, because bending the shank distorts the prong alignment. If they skip the re-tip, the stone will loosen within months. This is the same durability logic as prong metal longevity - a resize is a chance to reset the prongs properly, not just to change the size number.
Questions 5, 6 and 7: Cost, turnaround and liability
Get the resizing price in writing, including the re-tip. Ask the turnaround - a clean resize should take 5 to 7 working days; a supplier that quotes 2 days is rushing the bench work. Most important: ask who is liable if the stone cracks during resizing. The answer you want is that the supplier covers a replacement stone on a resize they perform. If they say "buyer assumes all risk," do not offer free resizing on their pieces. That clause is what protected the Amsterdam reseller's margin after the first incident - and it is the clause most stores forget to negotiate. The FTC Jewelry Guides also require that resized work not be misrepresented as new, so keep the resize record with the order.
Before you write "free resizing" into a listing, confirm the seven answers above with your supplier. If any answer is vague, write the listing as "resizing available for a small fee, within two sizes" instead. Honest bounds on the listing prevent the resize claim from becoming a warranty you cannot back, and they keep your bench jeweler inside the work they can actually do safely.
Can moissanite be resized safely?
Yes, when the stone is removed before heating the shank and re-seated after. Heating with the stone set in is the risky step.
How many sizes can a ring be adjusted?
Two sizes up or down is safe on most solitaire shanks. Beyond that, the band stretches thin and proportions change.
Does resizing damage the moissanite stone?
It should not, if the stone is removed. Cracks usually happen when heat is applied directly to a set stone.
Should resizing include a prong re-tip?
Yes. Bending the shank shifts prong alignment, and a re-tip on re-seat prevents a loose stone within months.
HOLYCOME resizes its own solitaire bands by removing the stone, with a written replacement guarantee on resize work. Spec your size mix on the custom order and keep the resize window inside two sizes to stay in the safe zone.
Frequently Asked Questions
Is moissanite a good diamond alternative for retail buyers?
Yes for price-sensitive customers who want brilliance and hardness. Moissanite ranks 9.25 on the Mohs scale, holds up to daily wear and costs a fraction of a natural diamond of the same size, so it resells fast in bridal and fashion lines.
What is the minimum order for wholesale moissanite?
MOQ starts at 50 pieces per design for stock items. Custom cuts and private-label settings usually start at 100–300 pieces depending on the mold.
Do you provide certificates with moissanite stones?
Yes. Every parcel ships with GRA or IGI documentation listing carat weight, color grade and cut. We recommend passing the certificate to your end customer for trust.
How long does sample and bulk production take?
Samples ship in 3–5 days. Bulk runs take 15–20 days under 500 pieces, and 25–30 days for custom work.
