Moissanite 101 · October 3, 2026 · 29 views

Real vs Fake Moissanite: How to Spot a CZ Impostor

Real vs Fake Moissanite: How to Spot a CZ Impostor

A buyer messages you a photo: a stone sold as “moissanite” that already looks foggy after three weeks on a display card. Your job is to tell, in under two minutes, whether the factory sent real SiC or a bag of cubic zirconia. Here is the field method we use on every incoming parcel, and the one we teach new resellers before they place a second order.

The chemistry difference

Real moissanite is silicon carbide (SiC). Cubic zirconia is zirconium dioxide (ZrO2), stabilized with yttrium or calcium oxide. They share a white, brilliant look at arm’s length but diverge on every measurable property. The cubic zirconia entry lists the key figures: CZ has a Mohs hardness of 8–8.5, a refractive index of 2.15–2.18, and a dispersion of about 0.058. Moissanite, by comparison, is Mohs 9.25, RI 2.65–2.69, dispersion 0.104. Those numbers are why CZ scratches in a pocket and fogs under hand lotion, while moissanite does not. A customer who puts a CZ solitaire next to a moissanite solitaire after six months of wear will see the difference immediately.

Four checks you can run at the bench

Look through the table for doubling

Moissanite is doubly refractive. With a 10× loupe, look straight down through the table facet at the back pavilion edges. In genuine moissanite you will see the facet lines doubled. CZ is singly refractive, so the lines stay single. This is the fastest free test and the one most impostors fail. It takes about ten seconds per stone.

Weigh the loose stone

CZ density is 5.6–6.0 g/cm³; moissanite is 3.22 g/cm³. A 6.5 mm round CZ weighs roughly 1.7–1.9 carats; the same size moissanite weighs about 1.0 carat. If a parcel marked “1 ct moissanite” weighs 1.8 ct on your scale, it is CZ. Keep a small digital carat scale at your QC bench—it pays for itself on the first bad parcel.

Run a thermal diamond tester

A basic thermal tester will read “diamond” on real moissanite, because SiC conducts heat similarly to diamond. It will read “non-diamond” on CZ. If your cheap tester says “non-diamond” on a stone the supplier swears is moissanite, you have CZ—or glass. For the nuance on why thermal testers confuse moissanite with diamond, read our diamond tester article.

Check the price floor

Genuine D-color VVS moissanite in 6.5 mm should not wholesale below roughly $4–$5 per piece in 50-piece lots. A supplier quoting $1.20 for “moissanite” at that size is shipping CZ. See our pricing tiers for the realistic floor and what each tier buys you.

Why impostors keep appearing

Alibaba and B2B marketplaces list thousands of vendors under the keyword “moissanite”. Many are trading houses that buy CZ in bulk, laser-stamp a generic GRA-style card, and resell it as moissanite. The card looks plausible; the stone is not. The defense is always the physical test—never the paperwork. We cover that gap in our GRA certificate guide so you know exactly what the card can and cannot prove. A quick bench test costs nothing and protects your retail reputation far better than arguing with a supplier about a certificate you cannot independently verify.

Frequently asked questions

Can a jeweller tell CZ from moissanite by eye alone?

Not reliably at arm’s length. Use the loupe doubling check, the scale, and a thermal tester together—any one of the three is weak, all three together are conclusive.

Does CZ sparkle more than moissanite?

No. CZ dispersion (0.058) is about half moissanite’s (0.104). CZ can look bright, but it lacks the rainbow fire.

What does a CZ impostor look like after wear?

CZ scratches within months on Mohs 8.5, loses polish, and can cloud from skin oils. Moissanite at 9.25 stays polished for years.

How do I protect my retail customers?

Disclose stone species by name on the tag, per the FTC Jewelry Guides. A stone labelled “moissanite” that is actually CZ is a misrepresentation under 16 CFR Part 23.

We also recommend running the four checks on every incoming parcel, not just the first one. Batch-to-batch substitution is the classic B2B failure mode: the sample arrives as real D-color moissanite, the second order arrives as CZ, and the supplier blames “factory mix-up” and offers a partial refund. A 60-second QC process—loupe, scale, thermal tester, price cross-check—on every parcel catches the swap before the stones hit your display cards. The cost of the QC bench is trivial compared with the cost of a customer finding a fogged CZ on your shelf and posting about it.

For a retail customer who wants to do the check at home, the loupe doubling test is the only one that does not require equipment. Hand them a 10× loupe (cost under $5 wholesale) and show them what doubled back facets look like on a known moissanite. They will leave trusting the stone and able to explain it to friends, which is the closest thing to word-of-mouth marketing a jewellery shop gets.

Wholesale CTA: Every HOLYCOME parcel ships with a real GRA grading card and passes the loupe/scale/thermal check on arrival. Order a 10-piece sample to benchmark your current stock before placing a full MOQ.

Need a quote for your next order?

Get Wholesale Pricing

Written by the Holycome manufacturing & quality team. Every figure and claim in this article comes from our own production floor in Wuzhou, China — in-house casting, stone setting and a three-pass quality inspection we have run since 2008.

Materials are tested for nickel, lead and cadmium release by SGS and CTT International; moissanite centre stones ship with their GRA warranty card and report. We also hold an independent SMETA / Sedex ethical-trade audit and a Hong Kong Customs AML registration.

Reviewed for accuracy by our quality team before publication. Last updated .